AmpliVox Mity-Lite Plus SW320 Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Altifalantes AmpliVox Mity-Lite Plus SW320. AmpliVox Mity-Lite Plus SW320 10 páginas. Battery powered pa system with bluetooth
Imprimir página
16 CHANNEL DIGITAL WIRELESS RECEIVER
•
The Dual Wireless Microphone Receiver powers
ON / OFF when the Main Power Switch B is
pressed ON / OFF.
•
The AmpliVox SW320 has two built-in receivers
CH.A / CH.B L with separate volume controls.
Each volume control is used to set output level of
the wireless microphone. Set wireless microphone
and master volume level at desired setting.
CHANNEL SELECT: Hold the SET M button to
•
enter the channel select mode. Once the channel
number starts to flash, press either the up / down
button to select a channel (1-16). Press SET M
button again to lock. Selection also will auto lock
without pressing button after 10 seconds.
CHANNEL DISPLAY K: Shows Channel Number /
•
Signal Strength; Receiver A / B and battery level of
microphone ( "A" receiver only).
With main power switch B on, rotate ON / OFF /
•
Volume Control O clockwise to turn Bluetooth mod-
ule on. A prompt tone will be heard and the power
indicator P will light blue. The LINK Q indicator will
start to flash, searching for a Bluetooth signal.
•
Turn on your Bluetooth device for pairing. On your
Bluetooth menu of your device, choose Portable PA.
Once paired, blue LINK indicator will stay on and you
will hear an audible tone beep twice. The Search
function will stay active for 10 minutes. If no signal is
found, this function will shut off.
•
You are now ready to stream audio from your device.
You can adjust the volume using the volume control
on the Bluetooth module O, the master volume con-
trol D and your Bluetooth device's volume control.
For maximum loudness set your Bluetooth device at
maximum loudness and then adjust using the other
two volume controls on the PA.
AF INDICATOR R will light green when audio signal
•
is received from the Bluetooth device.
•
If you are using a smartphone and you receive a
phone call, the audio will stop. When the phone call
has been completed the Bluetooth will automatically
be linked again to the PA.
L
NOTE: CHANNEL NUMBER SELECTED ON PA MUST
ALSO MATCH CHANNEL NUMBER ON WIRELESS
HANDHELD MICROPHONE.
P
Q
5
K
N
M
L
O
R