AmpliVox SW224A Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Altifalantes AmpliVox SW224A. AmpliVox SW224A 8 páginas. 50 watt portable pa system with

S1695 WIRELESS HANDHELD MICROPHONE for MODEL SW223A /SW224A

WARNING ! Microphone channel selected must match the same channel number

on the wireless microphone receiver or microphone will not work (SEE #16 ON PAGE 6).

Microphone Operation and Status Display

TURN ON MICROPHONE:

MUTE" (3) button until LCD screen lights up.

TO MUTE: Press "POWER/MUTE" button twice to MUTE. Chan-

nel number will flash when muted. Press button again twice to re-

move "MUTE".

TURN OFF MICROPHONE: Push and hold the " POWER/

MUTE" (3) button for 2 seconds to turn microphone " OFF".

SELECT CHANNEL:

2 seconds until you only see the word Channel and channel num-

ber. To change channel, when flashing, press the "SELECT" (4)

button until you reach the desired channel. Flashing will stop after

10 seconds and channel is now set.

LOCK / UNLOCK CHANNEL:

button and "SELECT" button at the same time to lock or unlock

channel. When locked, channel cannot be changed. "LOCKED"

symbol appears in upper left-hand corner.

1-800-572-2194 • DISPLAYS2GO.COM

Functions

1) Interchangeable Microphone Head

2) LCD Screen (see below)

3) Power / Mute Control Switch (see below)

4) Select Button (see below)

5) Microphone Input Sensitivity Adjustment—is used

to set the gain of microphone. If you are a soft talking

speaker you will need to turn the control counter clock-

wise. Turn clockwise if you are a loud talker. Use plastic

screwdriver that is supplied.

BATTERIES

1. Hold the body of microphone in hand and twist

off bottom section of microphone.

2. Insert two "AA" batteries.

3. Twist bottom section back on to microphone.

BATTERY STATUS

The life expectancy of the two batteries is about 10

hours. When the "BATTERY" symbol on the display

screen keeps flashing the batteries should be re-

placed immediately

Push and hold the "POWER/

Press and hold the "SELECT" (4) button for

Push the "POWER/MUTE" (3)