1byone Easy Chime OUKQH-0536 Manual de instruções - Página 3
Procurar online ou descarregar pdf Manual de instruções para Acessórios 1byone Easy Chime OUKQH-0536. 1byone Easy Chime OUKQH-0536 11 páginas.
Imprimir página
1. Speaker
3.Wall mounting hole
5. Sound and flash switch
6. Ringtone selector button
7. Pairing button
Parameters:
Voltage of
DC 3V (2 x AA batteries)
battery-operated receiver
Voltage of plug-in receiver
AC 220-240V
Voltage of push button
DC 3V (CR2032 battery)
Frequency
433.92MHz+100KHz
Operating range
100m/300ft (without obstacles)
Receiver: ＜0.3W Push button: ＜10mA
Power consumption:
Receiver's ring volume
Over 85dB within 0.5m/1.64ft
Working temperature
-20℃~50℃
3. Power supply:
Battery-operated receiver: The receiver is powered
by 2 x AA batteries. Please insert the batteries
using the following procedure:
a) Press the buckle on the battery compartment
cover and remove the battery compartment
cover at the back of the receiver.
- 03 -
2. LED indicator
4. Volume button
b) Insert the 2 x AA batteries using the correct
polarity to eliminate the danger of fire.
c) Reattach the battery compartment cover.
Plug in receiver: Please plug into a safety power
outlet.
Push button: The push button is powered by a 3V
battery (Type: CR2032). Please insert the battery
using the following procedure:
a) Insert a screwdriver into the small access port at
the bottom of the push button and remove the
push button's back cover.
b) Insert the 3V battery (type CR2032) into the
battery compartment, making sure the battery
surface marked with a "+" is facing upwards.
c) Reinsert the back cover, making sure it is
securely closed to ensure IP protection.
Note:
If the performance of the push button deteriorates
or completely stops, the battery might be
exhausted. Please replace with another 3V type
CR2032 battery.
- 04 -