Follett C25R5A/W Manual de operação, serviço e peças - Página 2

Procurar online ou descarregar pdf Manual de operação, serviço e peças para Dispensador de água Follett C25R5A/W. Follett C25R5A/W 17 páginas. Ice and water dispenser
Também para Follett C25R5A/W: Manual de instalação (13 páginas)

Welcome to Follett
Follett ice dispensers enjoy a well-deserved reputation for excellent performance, long-term reliability and outstanding
after-the-sale support. To ensure that your dispenser delivers this high performance, we ask that you review the first two
pages of this manual to understand the operation and requirements of your new dispenser. Pages 4 - 11 are for use by
service technicians maintaining the unit. Should you have any questions or require technical help at any time, please call
our technical service group at (800) 523-9361 or (888) 2-FOLLETT or (610) 252-7301.
Before you begin
Check your paperwork to determine which model you have. Follett model numbers are designed to provide information
about the type and capacity of Follett ice dispensing equipment. Following is an explanation of model numbers:
1. Dispenser configuration – C = countertop, H = wall mount, F = freestanding
C50T5A
2. Approximate storage capacity in lbs
3. Icemaker location – R = remote icemaker; T = integral icemaker in top of cabinet.
2 3 4 5
1
4. Icemaker capacity – 5 = 400 lbs/day, R22 refrigerant
5. Condenser type – A = air-cooled, W = water-cooled
!
Important cautions
• Dispenser bin area contains mechanical, moving parts. Keep hands and arms clear of this area at
all times. If access to this area is required, power to unit must be disconnected first.
• A Follett QC4-FL4S water filter system (order #AFSYSTMFL4S) in icemaker inlet water line is
recommended.
• Ice is slippery. Maintain counters and floors around dispenser in a clean and ice-free condition.
• Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.
• Countertop dispensers that sit on legs (not bolted to counter) can be inadvertently moved. Care should be
taken when operating and cleaning to avoid accidents.
Electrical specifications
Freestanding models and models with integral icemakers
Basic electrical
Alternate electrical 230/50/1
Models with remote icemakers
Models with remote icemakers require separate circuits and disconnects for icemaker and dispenser.
Basic electrical
Alternate electrical 230/50/1
All models must be hard-wired. Equipment ground required. Electric disconnects required within 10 ft (3m) of dispenser.
One disconnect each for dispenser and icemaker for all 25/50 series dispensers with remote icemaker.
Ambient specifications
Air Temp
Water Temp
Water Pressure
Plumbing
remote icemaker remote icemaker integral icemaker integral icemaker
Dispenser drain
Icemaker drain
Water inlet
Cond. inlet – w/c only
Cond. drain – w/c only
Note: Water shut-off recommended within 10 feet (3m) of dispenser.
Drain to be hard piped and insulated and maintain at least 1/4" per foot (6mm per 304mm run) of slope.
Note: No letter is used to indicate icemaker located in base of freestanding units.
115/60/1
Total system 13.0 amps, max. fuse size 20 amps
Total system 6.8 amps, max. fuse size 15 amps
115/60/1
Icemaker 11.0 amps, max. fuse size 20 amps
Dispenser 2.0 amps, max. fuse size 15 amps
Icemaker 6.0 amps, dispenser .8 amps, max. fuse size 15 amps each
100° F/38°C Max.
90°F/32°C Max.
70 P.S.I. Max.
C25/50 with
H25/50 with
3/4" FPT
3/4" ID
1/2" MPT
1/2" MPT
1/4" FPT
1/4" FPT
3/8" FPT
3/8" FPT
1/2" FPT
1/2" FPT

Operation

50°F/10°C Min.
40°F/4°C Min.
10 P.S.I. Min.
C25/50 with
3/4" FPT
3/8" FPT
1/2" FPT
1/2" FPT
2
H25/50 with
F25/50
3/4" ID
3/4" FPT
3/8" FPT
3/8" FPT
3/8" FPT
1/2" FPT
3/8" FPT
1/2" FPT
1/2" FPT