Comco AccuFlo AF10-ET Manual do equipamento - Página 4
Procurar online ou descarregar pdf Manual do equipamento para Ferramenta eléctrica Comco AccuFlo AF10-ET. Comco AccuFlo AF10-ET 14 páginas. Micro-abrasive blaster
Imprimir página1. Place the ComfortGrip® handpiece inside the work chamber.
2. Place the open end of the vent hose into the back of the workstation or into the dust collector hose.
3. Connect the power cord and the blast control cable.
4. Connect the air supply to the "Air In" fitting (using ¼" tubing provided in the accessory kit).
TO NOZZLE(S)
THE ABRASIVE HOSE FROM THE
POWDERGATE VALVE RUNS
DIRECTLY TO THE NOZZLE.
DO NOT ROUTE THIS HOSE
THROUGH THE VENT PINCH!
1.
Remove the tank cover.
2.
Fill the tank with powder. Do not fill above the
top of bypass tube.
3.
Replace the tank cover and secure (only ¾ turn
required).
Always maintain a 10 psi buffer between the AccuFlo
pressure setting and your compressor. This protects
against abrasive flowing backwards through the
machine.
Make Connections
VENT HOSE
IS ROUTED
THROUGH
THE VENT
PINCH
Add Abrasive
INLET AIR FITTING
1‐818‐841‐5500
4