Amprobe CO2-200 Manual do utilizador - Página 16

Procurar online ou descarregar pdf Manual do utilizador para Instrumentos de medição Amprobe CO2-200. Amprobe CO2-200 18 páginas. Wall mounted co2 meter

Imprimir página

MAINTENANCE

Instrument service personnel. The front panel and

case can be cleaned with a mild solution of detergent

and water. Apply sparingly with a soft cloth and allow

to dry completely before using. Do not use aromatic

hydrocarbons or chlorinated solvents for cleaning.

TROUBLE SHOOTING

Can't power on

• Check whether the adaptor is well plugged.

Slow response

• Check whether air flow channels on the rear were

blocked.

Error code

E01: CO2 sensor damaged.

E02: The value is under range.

E03: The value is over range.

E04: The original data error results in this error

(RH, DP, WB)

E07: Too low voltage to measure CO2. Check if the

adaptor output is 12V.

E11: Retry humidity calibration.

E17: Retry CO2 calibration.

E31: Temperature sensor damaged.

E34: Humidity sensor damaged.