DPA d:vice Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Acessórios DPA d:vice. DPA d:vice 8 páginas. Digital

The d:vice™ MMA-A can be used right out of the box but to take full advantage of it, please refer

to these instructions to get started using the d:vice™ App.

GAIN

Use the GAIN slider to adjust input levels. Slide

to the right to increase amplification, to the left

to decrease. Make sure to keep an eye on the

level meters when you are adjusting gain. The

meters should stay in the green and yellow areas.

FILTER

The FILTER button (low cut / high pass) cuts out

unwanted, low-end frequencies (rumble) that

can decrease the intelligibility of your recorded

audio. In most cases we suggest using the FILTER

button and if, for example, you are recording

outside near a road with traffic, this setting is

essential.

MONITOR

Use the MON button to send audio to your

headphones so you can hear what you are

recording. Please note that a headphone must

be connected to the iOS device, otherwise the

button will not activate and you'll be prompted

to connect a headset. If the headset includes

a microphone it must be connected prior

to connecting the d:vice™ via the Lightning

connector. This is due to the iOS 'last entry

active' nature of operation. (We recommend

using a wireless headset when using an iPhone

7.)

LOCK

Use the LOCK button to block 3rd party apps

from controlling gain. Gain settings can be

controlled and saved on the d:vice™ for use

in your favorite recording / broadcasting apps.

The lock button also controls the setting of the

low cut / high pass filter. Saved locked settings

are automatically activated the next time you

connect to the d:vice™.