Acer 7763PA - PalmPro SVGA DLP Projector Manual de instruções - Página 19
Procurar online ou descarregar pdf Manual de instruções para Projetor Acer 7763PA - PalmPro SVGA DLP Projector. Acer 7763PA - PalmPro SVGA DLP Projector 35 páginas. Digital multimedia projector
Também para Acer 7763PA - PalmPro SVGA DLP Projector: Manual de instruções (37 páginas)
Imprimir página
A Lamp/temperature Status LED Indicator
1. Lamp in excess of service hours
When the LED light is a continuous red, it means the lamp has
exceeded (*1500) service hours. After this light appears, it is
advisable to replace the projection lamp as soon as possible.
"PLEASE CHANGE A NEW LAMP. AND RESET THE LAMP TIMER" will be
i.
displayed on the screen if the lamp has been operated for 1400
hours (see figure 17).
"PLEASE CHANGE A NEW LAMP. THE POWER WILL TURN OFF AFTER 20
ii.
HOURS" will be displayed on the screen if the lamp has been
operated for 1480 hours. The "20" will count down (see figure
18).
"PLEASE CHANGE A NEW LAMP" will blink on the screen together
iii.
with a red LED if the lamp has been operated for more than
(*1500)
hours
automatically after 10 minutes. All three of the above messages
will not display for more than 3 minutes, but each message will
be displayed whenever you turn on the lamp.
Figure 18 Lamp replacement warning
signal Ⅱ
(see
figure
Figure 17 Lamp replacement warning signal Ⅰ
19).
The
power
Figure
19
warning signal Ⅲ
will
turn
Lamp
replacement
English 15
off