DPCAV ShutterBug Pro Manual de instruções

Procurar online ou descarregar pdf Manual de instruções para Controlador DPCAV ShutterBug Pro. DPCAV ShutterBug Pro 16 páginas. Digital camera controller

Imprimir página

ShutterBug Pro is a tiny accessory that helps take digital or film

camera snapshots. It is ideal for photographers that need to

remotely snap photos or require an intervalometer timer.

Despite its tiny size, it is packed with features.

FEATURE SUMMARY

Remote shutter activation using a model hobby R/C receiver (not included).

Standalone intervalometer operation using a flexible internal timer.

Auto-Sequence shutter control for continuous snapshots.

Supports two-stage (focus/snapshot) shutter operation.

Compatible with R/C servos for mechanical shutter operation.

Direct connect shutter interface uses safe solid state switches.

Digital camera "keep awake" function.

Operates on 3.3VDC to 5.4VDC (typical R/C servo voltage).

Low current draw. 2mA idle, 35mA (plus servo) during snapshot.

Weighs ~four grams, size 0.9" x 1.2"

WHAT IS IT?

ShutterBug Pro is a convenient accessory for expanding a camera's shutter features. It

precisely operates the focus and shutter stages upon a timed event or remote control signal. It

can even auto-repeat the shutter for a rapid series of shots. It also can be used to prevent a

digital camera from turning itself off, which is a real lifesaver in some applications.

A hobby R/C servo (not included) is used to activate the camera's shutter button. Direct wire

interfacing is possible too. For wireless remote photography, ShutterBug Pro is compatible with

many popular model hobby R/C systems.

Figure 3, Shutter Servo

HUTTER

Digital Camera Controller

The photo on the left shows a small blue servo installed on a

digital camera. In this installation the R/C servo was mounted

using double sided foam tape (so it can be removed without

damaging the camera). The servo's rotating arm is carefully

positioned above the shutter button.

Please keep in mind that each camera will be different. So

some mechanical trickery is often needed to accommodate

the servo. Just use your creativity to devise a reliable

mounting arrangement.

Page 1

Sep-15-2013