FOLLO FUTURA DIEM Manual - Página 9

Procurar online ou descarregar pdf Manual para Ginásio em casa FOLLO FUTURA DIEM. FOLLO FUTURA DIEM 16 páginas. 3-section

FOLLO DIEM 3-SECTION
We congratulate you on choosing a Follo Corpus product. This manual enables you to take
full advantage of the product from the first day in use. Please read these instructions
carefully before taking the product into use. Contents:
- Unpacking/installation
- How to use
- Technical specifications
NB! The manufacturer responsibility for CE marking is invalidated if any form of
modification is carried out.
Unpacking/installation:
Take care when removing packing materials. DO NOT use a knife or other sharp instrument
to avoid damaging the contents.
Inspect the bench for transport damage.
Study and acquaint yourself with the adjustment options. All bench sections are adjustable.
Safety instructions:
When adjusting the sections, take care to avoid pinching.
Do not exceed the specified weight limit (120kg).
How to use:
1.
Angle adjustment of back cushion (1):  Grip the back cushion and lift up to the
required angle (2). Operate the release arm (3) to lower the cushion. Hold the
cushion (3) and adjust to the required angle while holding up the release arm.
2.
Height adjustment of back cushion (1):  When the back cushion is in the raised
position, it can also be adjusted for height (see illustration). The release arm (5)
underneath the back cushion releases the locking device enabling in position.
Make sure the release arm is properly engaged.
3.
Adjustment of rear cushion (6):  The rear cushion can be placed in two positions;
horizontally on the top of the bench or vertically at the end of the bench (see
illustration). Adjust the cushion by gripping it and tilting it up or down (7). There is
no locking device on the rear cushion as it is immovable when it is in position.
4.
Adjustment of seat (8):  The seat has two-position adjustment: horizontal or
angled at approx. 10° (see illustration). To adjust the seat, grip it and tilt up (9), and
then rotate the supporting tube underneath the seat (10) upwards or downwards
and place the seat so that it rests on the supporting tube.
Maintenance instructions:
Check the following at regular intervals (every third month):
Check that the cushions are properly fixed in position and the hinging and locking devices
function properly.
Check that the cushions are not damaged or worn.
Check that the bench is stable.
- Safety information
- Maintenance instructions
- Spare parts list
To maintain the appearance of PVC Coated Fabrics they should be cleaned regularly to
remove fatty substances that may reduce their service life. A soft cloth and warm soapy
water should be used to clean the surface of the material. Mild soap or soap flakes are
recommended and residual soap should be removed using cold water. The surface should
be scrubbed with a soft brush. Solvent cleaners, wax polishes strong detergents and patent
chemical cleaners should not to be used. The use of these substances is likely to harmful
the coat and repeated use can result in the removal of elasticity from the PVC coating,
which will result in hardening and subsequent cracking of the material's surface. PVC
Coated Fabrics are resistant to most mild acids, alkalis and household stains. The vinyl may
absorb some substances such as ballpoint pen ink, lipstick, newsprint and food, and this
may cause permanent staining. This can often be minimised by immediate cleaning with
damp, soap cloth or sponge. Never place hot or cold items directly on PVC Coated Fabrics.
Technical specifications:
Height:
47cm
Width:
32cm
Length:
100cm
Weight:
19kg
F
D
H
OLLO
IEM
EAD
C
USHION
When ordering, please quote No.
136-012902-01
A head cushion can be ordered as
extra equipment for extending the
back cushion.
Unpacking/Installation
The upper square-section tube on the
back cushion must be removed and
replaced by the tube supplied with
the head cushion (please see
drawing for description).
Technical specifications
Length:
38 cm
Width:
25 cm
Weight
1 kg
20/11/18
Side 9
Rev: 19