DPCAV LCD-RC801-NBC Manual de instruções - Página 7

Procurar online ou descarregar pdf Manual de instruções para Monitor DPCAV LCD-RC801-NBC. DPCAV LCD-RC801-NBC 13 páginas. 7”screen / 5.8ghz / fpv diversity rx

Imprimir página

Operation Instructions

Power on/off

To turn on the monitor press and hold the

●

red light is on.

To turn off the monitor press (and hold) the power button and release it after the

●

monitor shuts off.

Working Mode

Press mode button can set up: DIV RX1 RX2 AV IN HDMI IN model.

●

Video TV system set-up (except HDMI mode): Press menu button to enter

●

function then

The DIV RX1 and RX2 modes are factory configured for all seven channels on

●

Band F (fully compatible with 5.8GHz ImmersionRC and FatShark).

Diversity Mode (normal applications)

The duel antenna diversity function automatically selects the antenna (ANT1 and

●

ANT2) with the highest signal strength (RSSI) for best RF link.

Antenna LED will show the current selecting antenna (strongest signal).

●

< - > and < + > button controls the RF channel change. There are 7-channels are

●

available and they must match the channel used by the video transmitter.

The DIV AV OUT jack is used for connecting a video recorder or an external

●

display.

NOTE: DIV AV OUT ONLY works under the diversity mode.

RX1 and RX2 Mode (special applications only)

Under this mode the RF channel of RX1 and RX2 can be set up separately.

●

< - > button selects the RX1 channel and the < + > button selects the RX2

●

channel.

●

The RX1 AV OUT and RX2 AV OUT jacks can be used to connect external

monitors for viewing two different video transmitters at the same time.

If there is only one transmitter being used then diversity mode is recommended

●

instead of RX1/RX2 mode.

When using the RX1/RX2 modes with two transmitters be sure to space their RF

●

channels far apart to avoid adjacent channel interference.

Video sys

to choose PAL or NTSC.

power button. Release it when the