Comdial SCbus Instalação - Página 7

Procurar online ou descarregar pdf Instalação para Sistema de conferência Comdial SCbus. Comdial SCbus 10 páginas.

Installing The SCbus Interface Board

Cable Connection For Initial Start-Up

Programming The System For SCbus Interface Board Operation

Once you have installed the SCbus interface board in the equipment cabinet and made the necessary cable

connections, you must perform several programming changes to make the board fully operational.

Installing The Board

1. Start the VMMI programming application.

2. Go to the Board ConfigurationSlot Assignment location.

3. From the open Slot Assignment dialog window,

(a) click the slot where you installed the board,

(b) click open the board type dialog,

(d) click the Apply button.

4. Configure the master clock setting as needed. Refer to the next section.

5. Test the installation to determine that the board is synchronized with Impact FXS' CPU board.

Once installed, the system creates 32 additional station ports that correspond with the 32 telecom ports on the

SCbus interface board. (Future software and hardware revisions will enable installers to program these telecom

ports to be either station or line boards.)

Maintenance Port

- System Software Turn On

- Initial VMMI Programming

- pcANYWHERE for Remote Operation

Connect Computer COM1 To Telephony COM1

(See text for remote data pipe operation details.)

CTI Application Key/Parallel Printer Port

Computer COM 1

Cable Connections For Normal Operation

Connecting The Interface Cabling 7

Computer COM 2

Computer

COM 5- 8 (4 Port)

or 5 - 12 (8 Port)

Telephony

COM 1- 6

(1 Com card)

or Com 1 -10

(2 Com cards)

IMI89–313