Comdial ATI-D-1PT Manual - Página 4
Procurar online ou descarregar pdf Manual para Equipamento de gravação Comdial ATI-D-1PT. Comdial ATI-D-1PT 19 páginas. Analog terminal interface on the dxp, dxp plus, and fx series digital communications systems
Imprimir páginaIMI89–208
Mounting Considerations For The ATI-D-1PT
1. The distance between the ATI-D-1PT and the common equipment must be 25 feet or less.
2. You can mount the ATI-D-1PT to any sturdy, flat surface.
3. The mounting location must be secure and dry and have adequate ventilation. The temperature range of the
location must be within 32-122° F (0-50° C).
4. If the mounting surface is damp or if it is masonry material, you must use a backboard between the
ATI-D-1PT and the mounting surface.
5. Tools and hardware required for mounting the ATI-D-1PT include:
•
fasteners (wood screws—1/4 x 1-inch round head— toggle bolts, or wall anchors),
•
screwdriver,
•
electric drill,
•
connecting tool (for fastening wires to a type-66 connector block),
•
crimping tool (for 623-type modular plugs).
Mounting The Cabinet
1. Unpack and carefully inspect the ATI-D-1PT for shipping damage. Notify the shipper immediately of any
damage found. Verify that the package contains all parts and accessories needed for proper installation and
operation.
2. If you are using a backboard, attach it securely to provide a stable mounting surface.
3. Use the base of the ATI-D-1PT as a template to measure and mark mounting hole locations.
4. Drill holes in the mounting surface to attach the hardware being used. If necessary, prepare these holes with
inserts, anchors, etc.
5. Insert the two top screws into the mounting surface and tighten them to within approximately 1/8-inch of the
surface.
6. Hang the ATI-D-1PT on the top screws using the mounting holes located on the rear of the cabinet.
7. Insert a third screw through the mounting tab located on the lower edge of the cabinet and tighten it into
place.
4 – Installing The ATI-D-1PT
Installing And Programming The ATI-D-1PT