Daiichi Electronics FSPTT2-92A-33 Manual de instruções - Página 9
Procurar online ou descarregar pdf Manual de instruções para Transdutor Daiichi Electronics FSPTT2-92A-33. Daiichi Electronics FSPTT2-92A-33 16 páginas. Power flow three phase power factor transducer
Imprimir página7.2 Performance
Item
Class index
2.0
Response time
1 second or less
Ripple
1%p-p or less
Usage group I
Fluctuation value
・Within the class index at 10 to 35℃
of influence due
to ambient
・Within two times the class index at 0 to 45℃
temperature
・Within three times the class index at -10 to 55℃
Within two times the class index at 20% of the 3rd harmonic
Fluctuation value
The error may be large in the measurement at the following inverter output.
of influence due
・Cycle control
to input amount
・PWM inverter
distortion
・SCR phase angle control
The output adjustment range is BIAS：±5% of the output span, MAX.：±5% of the output
Adjustment range
span. Use only when adjustment is required for matching with connected devices.
Output equivalent to the power factor 1 for power receiving at less than 10% of the
rated voltage.
Low input cut
Output equivalent to the power factor 1 for power receiving at less than 2% of the
rated current.
-20%, 120% (Second quadrant：% of output span on the power receiving LAG side)
・For 4 to 20mA output, 2.4mA, 21.6mA
・For ±5V output, -6V, 6V
Output limiter
-20%, 120% (Fourth quadrant：% of output span on the power receiving LAG side)
・For 4 to 20mA output, 3.2mA, 20.8mA
・For ±5V output, -5.5V, 5.5V
If the input specifications are LEAD 0 to 1 to LAG 0, there is no output limiter.
Operation method
Calculated from active power and reactive power (time division multiplication method)
Specification
8
Q-222-032