Daiichi Electronics HSQT2-93A Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Transdutor Daiichi Electronics HSQT2-93A. Daiichi Electronics HSQT2-93A 16 páginas. High speed multi power line transducer

Imprimir página
Item
Input
Overload
Auxiliary
capacity
supply
Output
Output line surge
Noise-capacity
ANSI C37.90a
JEA B-402
IEC801-2
External adjustment
of output
Count setting of
moving average
Structure
Operation temperature
and humidity range
Storage temperature
range
2 times 10 seconds and 1.2 times continuation of rated voltage.
40 times 1 second, 20 times 4 seconds, 10 times 16 seconds and 1.2 times continuation of
rated current.
1.5 times 10 seconds and 1.2 times continuation of rated voltage. (AC100/110V，AC200/220V，
DC24V)
1.5 times 10 seconds and 1.3 times continuation of rated voltage. (DC110V)
Voltage output：It is 10 times at 10 seconds intervals about short circuit in 1 second, and
1 times at 5 seconds interval. 70％ continuation of rated-output load.
Current output：Open continuation. 130％ continuation of rated-output load.
1250A 8/20μs Positive and negative polarity.
(1) Oscillatory surge voltage
If a vibration damping waveform (1～1.5MHz, peak voltage：2.5～3kV) is repeated for 30
seconds and applied, within ±10％ of errors.
(Auxiliary supply circuit. Voltage circuit. Current circuit)
(2) Square wave impulse noise
If a noise (1μs, 100ns width) is repeated and it applies for 5 minutes, within ±10％
of errors.
Auxiliary supply circuit, Voltage circuit (Normal / Common) Over 1.5kV
Current circuit (Common) Over 1.5kV
Analog output (Induction) Over 1.0kV
(3) Electromagnetic wave noise
The electromagnetic wave (5W, 1m) of 150MHz, 430MHz, and 900MHz band is irradiated.
And, the electromagnetic wave of a cellular phone 2GHz is irradiated by 0.5m.
Within ±10％ of errors.
(4) Electrostatic noise
It is within 10％ of errors in 8kV electrostatic noise at the case of energization.
There needs to be no damage at 10kV at the case of non-energization.
Condenser charge form
BIAS and MAX adjustment (front switch).
Adjustable range：±5％ to an output span.
The count of a moving average of A, V, W, and var can be altered.
1 time (With no average) ～ 3 times
Change with front DIP switches S10 and S11 is possible.
Outline dimension
120×120×130mm [ W×H×D ]
Case：Flame-resistant ABS(V-0).
Material
Terminal cover：Polycarbonate.
Case color
Black (Munsell N1.5)
Input, Auxiliary supply, Earth terminal：M4 screw
Terminal screw
Output terminal：M3 screw
Mass
Approx. 800g
-10 ～ +55℃ ，20 ～ 95％ RH (Non condensing)
-25 ～ +70℃
Specification
7
Q-208-081