COMECO TI08 Manual de operação - Página 6
Procurar online ou descarregar pdf Manual de operação para Painel tátil COMECO TI08. COMECO TI08 13 páginas. Process indicator (trip alarm unit)
Imprimir página
Parameter Programming
Some parameters
are accessible only
when the respective
functionality is installed.
(see 'Specifications').
- Changing
Point Position value
reflects on the real value
of all parameters
with ISU!
E.g.: changing
Point Position value
from (0) to (0.0)
would change
a set-point value
of 100 to 10.0!!!
Device parameters
TI08 is a programmable device whose
service behavior is determined by a set
of parameters. All the parameters, along
with their names, symbols, and value ranges,
are given in Table 1.
Setting numerical parameter value
♦
Enter parameter value adjustment mode
(see 'Program Levels').
♦
The whole part of the value together with
the left zeroes appears on the display,
and the rightmost digit blinks.
♦
To select another digit, press
♦
The 3 rightmost digits can accept values
from 0 to 9, and the leftmost digit
can also accept the values - and `.
♦
To increase or decrease the blinking digit
value, use respectively
♦
Confirm the adjusted value by pressing
simultaneously
♦
If the new value has not been confirmed
and no key has been pressed for a certain
period of time, value adjustment
automatically ceases, and the parameter
retains its initial value.
Setting symbolic parameter value
♦
Enter parameter value adjustment mode
(see 'Program Levels').
♦
Read the blinking parameter value.
♦
To change the value, use
and to confirm, press
+
or
.
♦
If the new value has not been confirmed
and no key has been pressed for a certain
period of time, value adjustment
automatically ceases, and the parameter
retains its initial value.
.
or
.
+
+
or
or
+
6
.
,