Fomei Digitalis Pro TX 400TTL Manual do utilizador - Página 6
Procurar online ou descarregar pdf Manual do utilizador para Equipamento de iluminação Fomei Digitalis Pro TX 400TTL. Fomei Digitalis Pro TX 400TTL 16 páginas. Battery flash, flash trigger
Imprimir página
Power On/Off
Press and hold power switch to turn on/off the unit. To reduce battery power use, TX TTL
is designed to go into Sleep mode after 30 minutes of non-activity and to turn off automa-
tically after 40 minutes of non-activity.
Flash control with TS-5 wireless controller/trigger
•
Attach TS-5 to Hot-shoe, turn on your camera and TS-5. If the flash does not get
camera brand automatically after Ts-5 is on, press and hold the simultaneously for 3
seconds to select different brand.
Hold these buttons simultaneously for 3 second to select different brand.
<TTL> Mode
•
Set camera scene modes to <Av> (aperture priority), <Tv> (shutter priority or <M>
(manual) mode to work with TTL.
<M> Mode
•
Set the selection mode <TTL>,<M> to M on TS-5, and adjust the accurate power on
TS-5.
Channel settings
•
Press „CH" button until the numeral digit starts blinking.
•
Then, press the up and down buttons to set the channels from 1~80.
•
Set TS-5 wireless trigger channel to the same channel on the TX TTL flash for ope-
ration. After pressing CH on the wireless trigger, push the up and down buttons to
change channel
Group settings
•
Designate up to 4 groups and these groups can be controled at the same time.
•
TS-5 wireless trigger group should be set to the same designated group in TX TTL
flash in order to operate the flash.
•
Press the A, B, C and D buttons on wireless trigger for settings.
C. PRODUCT USAGE
WWW.FOMEI.COM