CardAccess ZGB20 Manual de instalação e início rápido - Página 9

Procurar online ou descarregar pdf Manual de instalação e início rápido para Ponto de acesso sem fios CardAccess ZGB20. CardAccess ZGB20 12 páginas. Security sensor bridge v2

Imprimir página
Supervisory Timeout: sets the number of supervisory periods which must be missed before the "Supervisory
o
Lost" event is triggered. Supervisory periods for these sensors are every 64 minutes.
Supervisory State: shows current state of the supervisory signal monitor.
o
Statistics: shows the number of events and RX success of the sensor.
o
•
Actions Page Help:
•
Identify Sensor: Click this button to allow the driver to automatically 'learn' the TxID of the sensor. After clicking
the button, activate the 'Tamper' signal on the smoke detector by separating the unit from the mounting base.
When the sensor has been successfully identified, the TxID will appear in the Sensor TxID field of the Driver
Properties page.
•
Cancel Identify: Click this button to abort the sensor identify process. Note that clicking this button is not
necessary if you have successfully identified a sensor.
Carbon Monoxide Detector Driver Details
•
Supported Devices:
GE Wireless Carbon Monoxide Detector
o
-
Card Access Model Number: GCO10A
-
GE Model Number: 60-652-95
NOTE: This driver MUST be used in conjunction with the
Card Access Security Sensor Bridge hardware and
DriverWorks driver. GE Wireless Sensors do NOT need to
be associated in any way with a specific Security Sensor
Bridge in Composer.
•
Properties Page Help:
Sensor TxID: Enter the TxID printed on the Sensor Label. The TxID is a 6 or 7-digit alphanumeric address.
o
Sensor Name: An optional descriptive name may be entered here. This name is displayed on the property
o
page of the Bridge when data for this sensor is received.
Alarm Contact State: shows the current state of the alarm as "Alarm" (meaning CO is detected) or "No
o
Alarm" (meaning no CO has been detected).
Sensor Status: shows whether the sensor as "Online" or "Offline." This status is affected by the connection
o
state of the Security Sensor Bridge(s).
Last Sensor Event: shows the date and time of the last event received, as well as the contact status and low-
o
battery status.
_________________________________________________________________________________________________________________________
Card Access Security Sensor Bridge V2
Quick Start & Installation Guide
Page 9 of 12
Card Access, Inc.