CardAccess inhome IGA10A Manual de instalação - Página 5

Procurar online ou descarregar pdf Manual de instalação para Controlador CardAccess inhome IGA10A. CardAccess inhome IGA10A 8 páginas. For monitoring and controlling garage doors and enabling automation events

Imprimir página

Figure 2 – Garage Magnetic Door Contact / External Thermistor to InHome Wireless Contact Switch Wiring Diagram

1. Add a room to the Composer Project and name it something obviously associated with the garage (like 'Garage').

2. Add one InHome Wireless Contact Switch to the Garage room in the Composer Project and create the proper

bindings for two garage doors (please refer to the InHome Wireless Contact Switch Installation Guide included

with this Package and your Control4/Composer documentation for additional installation details).

3. Using the included mounting hardware, attach the two (2) GE Model 2317A-L Rail-Mounted Magnetic Door

Contacts—one to each of the two garage door rail assemblies (please refer to the 2315 Series Panel Door

Magnetic Contact document included with the Door Magnets for additional installation details).

4. Using the included mounting screws and wall anchors, mount the InHome Wireless Contact Switch to a location

ideally located between the two Rail-Mounted Magnetic Door Contacts (please refer to the InHome Wireless

Contact Switch Installation Guide included with this Package for additional installation details).

5. For each of the Rail-Mounted Magnetic Door Contacts, connect the proper wires to the InHome Wireless Contact

Switch's Tray Assembly using Pins 1 and 2 for Door Contact 1, and Pins 2 and 3 for Door Contact 2.

NOTE:

Magnetic Door Contact has three wires. You should

only connect two of the wires to the InHome Wireless

Contact Switch. The wires you need to use depend on

whether you want an event to be generated when the

door is opened (N.C.) or when the door is closed

(N.O.). For example, if you want to generate a contact

event on door open, connect the

InHome Wireless Contact Switch's Tray Assembly Pin

1, and the BLACK (Common) wire to Pin 2.

_________________________________________________________________________________________________________________________

™

Card Access

InHome

Garage Automation Package Installation Guide / Wiring Diagram

Monitor and Control Garage Doors, and Enable Automation Events in the Control4-Automated Homes

Each GE Model 2317A-L Rail-Mounted

RED

wire to the

Lead Color

Function

Black

Common

White

Closed Loop

(N.O.)

Red

Open Loop (N.C.)

Card Access, Inc.

Page 5 of 8