DR PRO-62V Manual de instruções de segurança e funcionamento - Página 9

Procurar online ou descarregar pdf Manual de instruções de segurança e funcionamento para Aparador DR PRO-62V. DR PRO-62V 20 páginas.
Também para DR PRO-62V: Manual de instruções de segurança e funcionamento (20 páginas), Manual de instruções de segurança e funcionamento (20 páginas)

Charge the Battery Pack before your first use

The DR Battery-Powered String Trimmer uses a sealed, Lithium-Ion Battery Pack. You MUST charge the Battery Pack for at least 60

minutes before you use the Trimmer for the first time. If you do not charge it before using the Trimmer, the Battery Pack's

charging capacity may decrease

•

Make sure the Charger Power Supply is plugged into a normal household voltage, 120volts, 60Hz, AC only.

•

You should operate the Battery Charger in a dry place with temperatures between 50ºF (10ºC) and +100ºF (+37.8ºC).

Operating above +100 ºF can cause Battery Pack leakage, rust, or degradation of the Battery Pack performance.

Connect the charger to a 120VAC outlet. When the Battery is not installed

(no load condition): the red LED will be lit.

Insert the Battery into the Charger (Figure 5). Under Normal Charging the

Green LED will Blink.

When the Battery is fully charged, The Green LED will remain light,

indicating that charging is complete.

Unplug the charger from the Outlet and remove the Battery.

Note:

There are more detailed instructions for charging and maintaining

the Battery/Charger in Chapter 4

Battery

Green

LED

Figure 5

Charger

Red LED