ams AG TCS3707 Manual de início rápido - Página 6

Procurar online ou descarregar pdf Manual de início rápido para Acessórios ams AG TCS3707. ams AG TCS3707 9 páginas. Als/color and proximity sensor with flicker detection evaluation kit

Imprimir página

Connect Hardware

Plug the TCS3707 Daughterboard into the Controller board (Figure 1). Always use ESD procedures

when handling the EVM.

Using the enclosed USB cable, plug the mini-B connector into the EVM module. Using the other end

of the cable, plug the USB A-connector into a USB port on the computer.

When the USB cable is connected, the green LED should flash momentarily on power up to indicate

that power is being received via the USB interface, and the controller board processor is running. If the

green LED does not flash, check the USB cable connections; unplug the USB cable and try again. If

the green LED still does not flash, check the PC for USB error messages.

Quick Start Guide • PUBLIC

QG000129 • v1-00 • 2019-Jan-09

TCS3707 ● ALS/Color and Proximity Sensor with

Document Feedback

Flicker Detection Evaluation Kit

Connect Hardware

│ 6