DR. BENDER PB WX8-10 VB Manual - Página 13

Procurar online ou descarregar pdf Manual para Amplificador DR. BENDER PB WX8-10 VB. DR. BENDER PB WX8-10 VB 19 páginas.

22. Check the machine every day for signs of damage, conduct a visual inspection:

Before reusing the tool, carefully check the safety equipment or slightly damaged parts to ensure that

they offer perfect and proper function. Check that all moving parts function correctly, that they do not

jam and that none of the parts are damaged. All parts must be correctly fitted and satisfy all the

conditions to ensure the perfect operation of the tool. Damaged safety equipment and parts must be

repaired or replaced properly by a specialist service contractor. Do not use any tools, which cannot be

turned on and off using the switch. Pay particular attention to ensuring electrical safety: Cables?

Plugs? Switches? Do all the components satisfy safety regulations?

23. Repairs may only be carried out by trained personnel. Before being used for the first time and after all

repair work, the safety of electric tools must be checked by an electrician pursuant to VBG 4, § 5. This

inspection must also be conducted and documented at regular intervals – at least once per year.

24. Please note that as an operator, you are responsible for complying with any additional regulations. For

example, if electric tools are used in a wet and/or damp environment, the regulations of the "Stone

and Earth" Professional Association must be satisfied.

25. Electrical safety and fire safety: just as DR. BENDER did in the last 20 years, the new version of VDE

0100 also recommends the additional safety protection and fire protection of each tool achieved by

using low cost FI and DI/PRCD circuit-breakers.