Dr. Dunk A Series Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Desporto & Ar livre Dr. Dunk A Series. Dr. Dunk A Series 19 páginas.

Heavy-Duty Basketball Stand - SBA305 - A Series

Assembly and Set-Up

Connect the top pole (W), middle pole (X)

and bottom pole (Y). Pay close attention to

the direction of these three poles. The holes

on the end connectors must overlap together

to be more convenient to the next installation

of fixed bolts.

Install the triangular block (Q) on the middle

pole (X) with bolts J1, J2 and J3.

Secure the top pole (W), middle pole

(X) and bottom pole (Y) together with

bolts F1, F2, and F3.

Install the bottom pole (Y) on the

base (BB) with bolts O1 and O2,

ensuring that the triangular block (Q)

is facing backwards after installation.

E&OE

Video Tutorial:

Assembly

Insert wheel shaft (V) into

wheel (M), base (BB) &

wheel bracket (GG) one-by-

one.

Secure the pole braces U1,

U2, U3, U4 on base with

bolts N1, N2, N3, N4. Note

that the pole braces U1 ,U2

are fixed on the two sides of

base (BB) & the wheel

bracket (M) must be fixed

with the bottom end of pole

braces U3, U4 together.

When the pole joint

has a burr or pipe end

deformation, strike the

bottom of the pole

firmly 3 to 4 times on a

piece of wood or

cardboard.

Fix the pole braces (U1, U2, U3,

U4) on the middle pole (X) with

bolts G1, G2, and G3. The top end

of U1 and U2 must be fixed inside

the pole brace (U3, U4), near the

middle pole (X).