Dr. Mach LED 150 Manual do utilizador - Página 4

Procurar online ou descarregar pdf Manual do utilizador para Equipamento médico Dr. Mach LED 150. Dr. Mach LED 150 5 páginas.

Imprimir página

User manual - English

4. Operating the Mach LED 150 light

ON/OFF switch of the light

(to switch off, hold for one sec-

ond) (1)

Adjust the brightness in six lev-

els between 50 and 100%

(2 and 3) (lowest leve l= endos-

copy light)

Display of the set brightness (4),

the uppermost LED will flash in

Standby

If only the top LED lights up, the

light is in endoscopy mode

Focus the light field by turning

the handle (5)

Position the lamp body using

the handle (5) or the handle

bar (6)

59321001

5. Operating the Mach LED 150MC light

Switching the light on/off

(to turn off the light, press and

hold the (ON/OFF) button for one

second).

Adjusting the brightness

Switching on the endoscopy

mode

Adjusting the colour temperature

6. Cleaning and disinfecting

Cleaning and disinfecting work must only be done by trained

staff. The respective requirements must be observed for all

cleaning and disinfection work (details can be found in the man-

ual).

Housing/protective screen

The housing and the protective screen of the lamp body can be

cleaned and disinfected with many common/commercially available

materials. Do not use cleaning agents or disinfectants contain-

ing active substances based on biguanides, phenols, chlorides

or percompounds.

Furthermore, only cleaning agents approved for polycarbonate (PC)

may be used to clean the protective screen. To protect against me-

chanical damage, always use a damp cloth (never a dry one) to wipe

the protective screen and after cleaning, wipe with an anti-static

agent (lint-free cloth).

Sterilisable handle

The handle must be cleaned/disinfected before each use. It can be

steam sterilised (max. 200 sterilisation cycles for max. 5 minutes at

a max. temperature of 134°C); details can be found in the manual.

Before installing the handle, check it for visible damage, fouling

and the specified manufacturing date. Do not use damaged or

dirty handles or handles that are more than two years old.

8 / 93

7. Faults

In the event of unusual examination conditions, the lamp must not be

used, as safe operation cannot be guaranteed. For troubleshooting,

disconnect the lamp from the mains for about 30 seconds. In the

event of continuous faults, a suitably trained service technician must

be contacted.

8. Information on electromagnetic

compatibility

Medical electrical equipment is subject to special precautionary

measures with regard to electromagnetic compatibility (EMC). It may

only be installed and put into service in accordance with the EMC

instructions in the accompanying documents. The Mach LED 150

and Mach 150MC operating light are intended for use in professional

healthcare facilities.

The emission characteristics of this device

permit its use in industrial and hospital envi-

ronments (CISPR 11, Class A). When used in

a residential environment (which usually re-

quires Class B according to CISPR 11), this

device may not provide adequate protection of

radio services. The user may need to take re-

medial action such as relocating or reorientat-

ing the device.

Portable and mobile RF communications

equipment can affect medical electrical equip-

ment and must not be used within 30 cm of the

light, including the cable.

The light is suitable for use in conjunction with

an RF surgical device. A minimum distance of

50 cm must be maintained between the surgi-

cal light, including its suspension system, and

the RF electrode cables.

The use of this equipment immediately next to

other equipment or with other equipment in

stacked form should be avoided since this may

result in faulty operation. Should use in the

aforementioned manner nevertheless be nec-

essary, this device and the other equipment

should be kept under observation to ensure

that they are working properly.

Mach LED 150

2023-09-19