Dr. Mach Mach 380 Instruções de montagem - Página 5

Procurar online ou descarregar pdf Instruções de montagem para Luz exterior Dr. Mach Mach 380. Dr. Mach Mach 380 14 páginas. Stand lamp

Mach 380 / Mach M3 Stand model

2. Mounting the central spring arm to the stand tube

View of the spring arm from below

59520001

Edition 10

Put the lower protective cover A2 on the stand tube

and fix it.

If necessary, loosen the screws at the two braces in

order to arrange the handle in horizontal position.

Attention:

Then tighten all six screws.

Now put the upper protective cover A3 on the stand

tube and fix it.

Mount the open cover A4 included in the scope of

supply.

The stand can be ordered optionally with a clamp

rail.

This clamp rail is fixed with the enclosed two

screws above cover A3.

For mounting the central spring arm to the stand

tube proceed as follows:

•

Insert journal 1 of the spring arm into stand

head 2. The electrical connection is ensured by

a cable with plug inside the stand head.

•

Make sure, that stop pin 3 at the spring arm lies

in countersinking 4 at the stand head as shown

in the figure.

11.08.2004 / Bak Page 5/14

Dr. Mach

Lamps and Engineering