Electrolux # Manual de utilização e cuidados - Página 13

PLACEMENT OF BURNER HEADS AND CAPS

For the 18 000 BTU burner:

Place the burner head over the gas orifice (Figure 1). Be careful not to

damage the electrode while placing the burner head over the

orifice. Make sure electrode fits correctly into slot in burner head.

For all burners:

Place a burner cap on each burner head

(see Figure 2), matching the cap size to

the head size. The cap for each burner

has an inner locating ring which centers

the cap correctly on the burner head. Be

sure that all the burner caps and burner

heads are correctly placed BEFORE using

your appliance.

Make sure each burner cap is properly

aligned and level.

Turn the burner on to determine if it will

light. If the burner does not light, contact a

Service Center. Do not service the sealed

burner yourself.

Place grates on the Ceramic Glass Cooktop. Be sure they are right

located inside the stainless steel frame.

ATTENTION: Do not slide the grates on the stainless steel frame, doing

so can damage the surface.

Surface Cooking

Burner

Head

Gas

Opening

Figure 1

Burner Cap

Burner

Head

Figure 2