Bosch 2 Manual de instruções e instruções de instalação - Página 14

Imprimir página

Bosch 2 Manual de instruções e instruções de instalação

Programme default settings

Programme default

settings

You can find possible

Note:

P r o g r a m m e d e f a u l t s e t t i n g s

programme default settings in the

overview; these differ depending on the

model.

The programme default settings for all

programmes are preset at the factory

and are displayed in the display panel

after the programme is selected.

°C Temperature

(s Temp. °C)

Depending on the programme

progress, you can change the preset

washing temperature (in °C) before and

during the programme.

Press the temperature button repeatedly

until the required temperature is

displayed in the display panel.

The maximum temperature that can be

set depends on the programme that has

been selected.

Programme overview ~

Supplementary sheet for the installation

and operating instructions

0 Spin speed

(Spin, rpm, 0)

Depending on the programme

progress, you can change the spin

speed (in rpm; revolutions per minute)

before and during the programme.

To do this, press the Spin Speed button

repeatedly until the required spin speed

is displayed in the display panel.

The maximum speed that can be

selected depends on the model and

programme that has been selected.

- - - - Rinse Stop setting (without final

spin). The laundry remains in the water

after the last rinse cycle.

You can select - - - - Rinse Stop (without

final spin) to prevent creasing if the

laundry is not taken out of the washing

machine immediately after the

programme has ended.

Programme overview ~

Supplementary sheet for the installation

and operating instructions

5 Ready in

(Finished in, 5, 4, 3)

The respective programme length is

displayed by selecting the programme.

The length of the programme is

automatically adjusted when the

programme is running. Changes to the

programme default settings or

additional programme settings also

change the programme length.

Before starting the programme, the

programme end ("Ready in" time) can

be preselected in increments of one

hour (h = hours) up to a maximum of 24

hours.

Select the required programme.

The programme duration is

Note:

displayed in the display panel.

Press the Ready in button

repeatedly until the required number

of hours is displayed in the display

panel.

Press the Start button.

The set "Ready in" time is now active.

The selected programme starts

automatically and ends after the

selected number of hours.

After the programme has started, the

programme duration, e.g. 2:30

(hours:minutes), is displayed in the

display panel.