Bosch 8 Series Manual do utilizador e instruções de instalação - Página 8

Imprimir página

Bosch 8 Series Manual do utilizador e instruções de instalação

en Before using for the first time

For most selection lists, e.g. programmes, the first

point begins again following the last point. For some

selection lists, e.g. cooking time, rotate the control ring

back again once the minimum or maximum value has

been reached.

Display

You can see the current setting values or options in the

display.

Display

Highlighted information

Enlargement

Display ring

There is a display ring around the outside of the dis-

play.

If you are changing a value, the display ring shows you

where you are in the selection list.

Depending on the settings area and the length of the

selection list, the display ring may be either a continu-

ous or a segmented line.

When the appliance is in operation, the display ring

shows the progress and turns red at one-second inter-

vals. After every full minute, the segments are filled

again from the beginning. As the cooking time counts

down, one segment disappears every second.

4.2 Cooking compartment

The functions in the cooking compartment make your

appliance easier to use.

Interior lighting

When you open the appliance door, the interior lighting

switches on. If the appliance door remains open for

longer than approx. 5 minutes, the interior lighting

switches off again.

5 Before using for the first time

Configure the settings for initial start-up. Clean the ap-

pliance and accessories.

5.1 Initial use

When the appliance is connected to the power supply

for the first time or following a lengthy power failure, the

settings for the initial start-up of your appliance appear.

Notes

¡ You can adjust the settings at any time in the basic

settings.

→ "Basic settings", Page 13

Description

The highlighted value can

be changed directly

without selecting the

value beforehand. Once

an operation starts, the

duration is always high-

lighted.

As long as you use the

control ring to change the

highlighted value, only

this value is displayed lar-

ger.

With most types of heating and functions, the interior

lighting remains on while the appliance is in operation.

The interior lighting switches off again when the opera-

tion stops.

Cooling fan

The cooling fan switches on and off as required. The

hot air escapes through the ventilation slots above the

appliance door.

ATTENTION!

Covering the ventilation slots will cause the appliance

to overheat.

▶

Do not cover the ventilation slots.

To cool the cooking compartment more quickly after

operation, the cooling fan continues to run for a certain

period afterwards. If the appliance is running in mi-

crowave operation, the appliance remains cool, but the

cooling fan still switches on. The cooling fan may con-

tinue to run even when microwave operation has

ended.

Condensation

Condensation can occur in the cooking compartment

and on the appliance door when cooking. Condensa-

tion is normal and does not adversely affect appliance

operation. Wipe away the condensation after cooking.

Automatic door opener

If you press the automatic door-opener, the appliance

door springs open. You can fully open the appliance

door manually.

Notes

¡ In the event of a power failure, the automatic door-

opening does not work. You can open the door

manually.

¡ If you open the appliance door during operation,

this pauses the operation.

¡ When you close the appliance door, the operation

does not continue automatically. Start the operation.

¡ If the appliance is switched off for an extended

period of time, the appliance door opens with a time

delay.

¡ Open and close the appliance door for the internal

inspection before the initial start-up or after any

power failure.

Setting the language

Use the control ring to set the language.

Press

⁠ .

a The display shows the next setting.

Setting the time

Use the control ring to set the time.