Bosch 800 Series Manual de instalação - Página 11

Imprimir página

Installation Checklist

Please refer to the pages following for complete

installation instructions. Use this checklist to verify that

you have completed each step of the installation

process. This can help you avoid mistakes.

Installation step

Before installing the range, be sure to verify the

cabinet dimensions are correct for your unit and

that the required electrical and gas connections

are present.

Before installing the range, make sure that any

opening in the wall behind the appliance and in

the floor under the appliance shall be sealed.

Refer to the installation manual for content

regarding Safety, Cabinet Dimensions, Remov-

ing Packaging, Electrical Installation, Gas Con-

nection, and Customer Service.

Installation Procedure

An air curtain or other overhead range hood, which

operates by blowing a downward airflow onto a range,

shall not be used in conjunction with the gas range

unless the hood and range have been designed and

tested in accordance with ANSI Z21.1 and listed by an

independent testing laboratory for combination use.

How to Remove the Oven Door

WARNING

Make sure the oven is cool and the power to the

▯

oven has been turned off before removing the

door. Failure to do so could result in electrical

shock or burns.

The oven door is heavy and parts of it are fragile.

▯

Use both hands to remove the oven door. The

door front is glass. Handle carefully to avoid

breaking.

Grasp only the side of the oven door. Do not

▯

grasp the handle as it may swing in your hand

and cause damage or injury.

Failure to grasp the oven door firmly and properly

▯

could result in personal injury or product damage.

To avoid injury from the hinge bracket snapping

▯

closed, make sure that both levers are securely in

place before removing the door. Also, do not

force the door open or closed – this could

damage the hinge or result in injury.

Do not place the removed door down on sharp or

▯

pointed objects as this could break the glass. Lay

on a flat, smooth surface, positioned so that the

door cannot fall over.

I n s t a l l a t i o n P r o c e d u r e

To avoid injury or damage, make sure that you read the

above WARNING before attempting to remove the oven

door.

Open the oven door to its fully open position.

Lock the two hinges on the left and right using the

locking pin. The locking pins must be fully inserted into

the holes in the hinges.

Installation step

Removing the oven door prior to installation

reduces the unit weight and makes the range

easier to move. Additionally, the removal of the

oven door provides access to handholds for lift-

ing.

Fitting the adjustable feet.

Prepare the gas connection.

Move the range (2 people needed) into place in

front of the installation opening, leaving the bot-

tom packaging on the unit to avoid damaging

flooring.

Plug the range into a properly configured recep-

tacle.

Protect the flooring from damage, then slide the

unit all the way into place, making sure to route

the power cord correctly.

Reinstall the oven door.