Bosch Ascenta SHE4AM12U Instruções de reparação - Página 16
Procurar online ou descarregar pdf Instruções de reparação para Máquina de lavar loiça Bosch Ascenta SHE4AM12U. Bosch Ascenta SHE4AM12U 27 páginas.
Também para Bosch Ascenta SHE4AM12U: Instruções de reparação (50 páginas)
![Bosch Ascenta SHE4AM12U Instruções de reparação](/uploads/products/server2/1327657/1327657.jpg)
Not all terminals are used. To protect power modules, two plugs
are used to cover unused terminals.
Plugs
5.4
Fascia panel disassembly
Remove six (6) long fascia panel screws from top of inner door,
then lift fascia panel out from door. Be careful to not damage
wire harnesses. Six (6) inner door screws are different, so don't
mix screws when removing fascia panel and inner door.
Dishwashers have separate (short) on/off switch and display
module wire harnesses held in fascia panels by connectors. To
remove connectors, pull up from fascia panel.
702_58300000130262_ara_en_b
Connector
On/off
switch
On/off switch
harness
Remove handle trays (SHE models) before removing display
modules. To remove both, carefully pry in plastic clips.
Handle tray
Display
For display module, start prying clips from one side and gently lift
display as you pry clips from one side to the other.
Prying display module tabs
Connector
Display
Display
harness
Prying handle
tray clips
Pulling out display module
Page 16 of 27