Bosch Ascenta SHE5AM02UC Instruções de reparação - Página 26

Procurar online ou descarregar pdf Instruções de reparação para Máquina de lavar loiça Bosch Ascenta SHE5AM02UC. Bosch Ascenta SHE5AM02UC 50 páginas. Quick reference instructions
Também para Bosch Ascenta SHE5AM02UC: Manual de instruções de instalação (21 páginas), Manual de Energia (2 páginas), Começar a trabalhar (2 páginas), Instruções de reparação (27 páginas)

5.2.3

Base mounted controls (power modules)

Power modules are located in the base on the right side of

dishwashers, not behind fascia panels. So:

 Dishwashers must be pulled out to change controls.

 Dishwashers must be pulled out to measure voltages &

resistances (at the control).

5.2.3.1

To access base-mounted controls

Tools needed: T20 Torx, # 2 Phillips and flat blade screwdriver.

1. Remove toe kick – section 5.1.4.1.

2. Disconnect & pull out dishwasher – section 5.1.4.2.

702_58300000130262_ara_en_c

5.2.3.2

To remove base-mounted controls

Tools needed: Flat blade screwdriver

1. Two plastic base tabs hold the power module in place. To

remove power module, gently pry tabs until they clear

module (below left), move bottom of module (in toward

heat pump) until it clears base (below right) and pull

module from base.

2. Pry cover tabs to open cover (below left), then disconnect

wire harnesses from power module (below right).

Page 26 of 50