Bosch DISHWASHER Manual de Instruções - Página 20

Imprimir página

Operating the appliance

Operating

the appliance

a n c e

a p p l i

n g t h e

O p e r a t i

Programme data

The programme data (consumption

values) can be found in the summary of

instructions. They refer to normal

conditions and the water hardness set

value

. Different influencing factors

such as e.g. water temperature or line

pressure may result in deviations.

A qua sensor *

Aq u a s e n s o r

* depending on model

The Aqua sensor is an optical

measuring device (light barrier) which

measures the turbidity of the rinsing

water.

The Aqua sensor is used according to

the programme. If the Aqua sensor is

active, "clean" rinsing water can be

transferred to the next rinse bath and

water consumption can be reduced by

3–6 litres. If the turbidity is greater, the

water is drained and is replaced with

fresh water. In the automatic

programmes the temperature and

running time can also be adjusted to the

degree of soiling.

Switching on the appliance

1. Turn on the tap fully.

2. Switch on ON/OFF switch (.

3. Rotate programme selector 8 to

the required programme.

The expected programme duration

flashes on the digital display H.

4. Press START button @.

The programme starts running.

Note

- for environmentally friendly operation

of the dishwasher:

The Eco 50° programme is a

particularly environmentally friendly

programme. According to EU

regulation 1016/2010 it is the

"Standard programme" which is the

most efficient standard cleaning cycle

for cleaning normally soiled utensils in

terms of the combined energy and

water consumption for cleaning these

types of utensils.

Remaining running time

display

When the programme is selected, the

remaining running time of the

programme is indicated on the digital

display H.

The running time is determined during

the programme by the water

temperature, the number of utensils as

well as the degree of soiling and may

vary (depending on the selected

programme).

Timer programming *

Ti m e r pr o g r a m mi n g

* depending on model

You can delay the start of the

programme in 1-hour steps up to

24 hours.

1. Close the door.

2. Switch on ON/OFF switch (.

3. Press button P until the digital

display H jumps to

4. Press button P until the displayed

time corresponds with your

requirements.