Bosch DISHWASHER Manual de instruções de instalação - Página 11

Imprimir página

Bosch DISHWASHER Manual de instruções de instalação

25"

(636 mm)

23-1/16"

(586 mm)

Figure 15

Figure 16

Figure 17

Door Panel Installation

DOOR PANEL INSTALLATION

SHU Models - Accessory Panel Installation

If you have an SHU model and have ordered an accessory

panel kit, install the panel prior to sliding the dishwasher

1/4" max.

(6 mm)

into place. The panel dimensions are shown in Figure 15.

SHI Models - Panel Installation

SHI models come with additional mounting hardware and a

template sheet with installation instructions. The stainless

steel models of the SHI series also come with two exten-

sion pieces. The extension pieces are used to match the

control panel height (Figure 16, "B" dimension) to the

horizontal drawer line of the cabinets, and must be

installed as shown in on the template sheet. The standard

piece is used for drawer heights up to 6" (152mm); the long

piece is used for drawer heights greater than 6" (152mm)

but 6-7/16" (164mm) or less. If your drawers are taller than

6-7/16", you can either slide the extension piece in as far

as it will go, or remove it and fit the door panel directly

below the control panel.

SHI/SHV Models - Panel Installation

SHV models come with additional mounting hardware and

a template sheet that will show you how to mount the

panel. One side of the template shows how to mount a one

piece panel; the other side shows how to mount a two

piece panel. Decide which type of installation you want

before proceeding with the installation.

Fig. 16

Dimension

SHI Only

Extension "A"

Max. - Min.

Standard

Long

5 5/16

1 1/8 - 11/16"

11/16 - 5/16"

(135mm)

(18-8mm)

(29 - 18mm)

Fig. 17

Panel Dimension

Dimension

20 11/16" - 25"

D (SHI)

(526mm - 635mm)

27 3/16" - 30 5/16"

(SHI & SHV)

(690mm - 770mm)

23 3/16" - 23 3/8"

(SHI & SHV)

(589mm - 594mm)

"C"

"B"

Max.-Min.

6 7/16 - 5 5/8

(164 - 143mm)