Bosch FAP-OC 500Series Manual de instruções de instalação - Página 7

Imprimir página

Bosch FAP-OC 500Series Manual de instruções de instalação

5. Install Oven

1. Slide oven into cabinet cutout.

2. Push straight in until oven trim is ﬂush with

cabinet wall, being careful not to crimp ﬂexible con-

duit between oven and cabinet back wall. The oven

should be straight, not crooked.

3. Install screws (two or four depending on model)

through tap holes in trim.

6. Test Operation

For 700 Series Models:

1. Verify that all control knobs are in the OFF position.

2. Turn on power at the breaker.

The clock will appear in the display.

3. Check power at junction box using a volt meter.

For 240 V installation, the reading between the red

and black wires (line to line) should be 220 to 240

volts.

For 208 V installation, the reading between the red

and black wires (line to line) should be 190 to 208

volts.

4. Test the oven mode.

Press COOKING MODE.

Turn knob to BAKE.

Touch START.

PREHEAT appears in display.

When the oven has reached the set temperature

(350° F), it beeps and PREHEAT no longer appears.

If installing a double oven, test the second oven as

well.

5. If any of the tests do not result as explained above,

contact Bosch service: 800-944-2904. Otherwise, the

installation is complete at this time.

For 5000 Series Models:

1. Verify that all control knobs are in the OFF position.

2. Turn on power at the breaker.

The oven will beep and the clock will appear in the

display. The lock icons in the display will blink on

and off and you will hear a series of clicks as the

oven performs a system check.

When successfully completed, only the clock time

will appear in the display. The clock is preset to 12:00

AM.

3. Check power at junction box using a volt meter.

For 240 V installation, the reading between the red

and black wires (line to line) should be 220 to 240

volts.

For 208 V installation, the reading between the red

and black wires (line to line) should be 190 to 208

volts.

Step 5 and 6: Install Oven and Test Operation

4. Test the oven mode.

Turn cooking mode selector knob to BAKE. The

following should occur:

•

350 °F (the default baking temperature) and

COOK appear in the display.

•

Red preheat indicator lights up.

•

Oven light and fan turn on.

If installing a double oven, test the second oven

as well.

5. If any of the tests do not result as explained

above, contact Bosch service: 800-944-2904.

Otherwise, the installation is complete at this

time.

English • 5