Bosch FAP-OC 500Series Manual de instalação - Página 5

Imprimir página

Bosch FAP-OC 500Series Manual de instalação

Before you begin

Tools and parts needed

Philips head screwdriver

▯

1/8" drill bit and drill

▯

Measuring tape

▯

Parts included

Microwave oven

▯

Philips head screws

▯

Checklist for Installation

Use this checklist to verify that you have completed each

step of the installation process. This can help you avoid

mistakes.

Refer to detailed instructions for each step in the

sections following this checklist.

Before installing the appliance, be sure to verify the

cabinet dimensions are correct for your appliance and

that the required electrical connections are present.

Make sure the electrical conduit provided on the

appliance is able to reach to the point of connection.

Section: Dimensions and Cabinet Requirements

Move the appliance into place in front of the cabinet

opening.

Section: Removing Packaging

Removing Packaging

NOTICE: To prevent damage to your floor keep the unit

in its packaging base until ready to be placed in the

cabinet opening. Do not slide the unit across the flooring.

Different models use different packaging materials.

Bracket remains in packaging base.

Cut straps on outside of box.

Remove cardboard box.

Remove all top and side cardboard and Styrofoam

braces.

Place oven in front of cabinets where it is to be

installed.

NOTICE: To avoid damage to the microwave oven, do

not grip or use the door or door handle while the

microwave oven is being handled.

B e f o r e y o u b e g i n

Power Requirements

The outlet must be properly grounded in accordance with

all applicable codes.

It can be installed in the back wall directly behind the

appliance.

You can also connect your appliance directly to a

compatible conventional Built-in Oven. Refer to separate

Combination Instructions.

Remove packaging materials, leaving the bottom

packaging on the appliance to avoid damage to the

floor.

Section: Removing Packaging

Team-lift the appliance directly into the cabinet cutout.

Section: Install Appliance, "Mount to Cabinet"

Slide the appliance all the way into place.

Section: Install Appliance, "Mount to Cabinet"

Fasten the appliance to the cabinet opening with the

screws supplied.

Section: Install Appliance, "Mount to Cabinet"

Always read and follow the complete installation

instructions contained in this manual.