Bosch FAP-OC 500Series Manual de utilização e cuidados - Página 11

Procurar online ou descarregar pdf Manual de utilização e cuidados para Máquina de lavar loiça Bosch FAP-OC 500Series. Bosch FAP-OC 500Series 44 páginas. Built-in wall ovens
Também para Bosch FAP-OC 500Series: Manual de instruções de instalação (21 páginas), Manual de instruções de utilização (40 páginas), Manual de instalação (6 páginas), Informações sobre o produto (40 páginas), Manual de instalação (28 páginas), Manual do utilizador (48 páginas), Manual do utilizador (48 páginas), Manual de instalação (28 páginas), Manual de instalação (32 páginas), Manual de utilização e cuidados / Instruções de instalação (40 páginas), Manual de referência rápida (4 páginas), Manual de utilização e cuidados (27 páginas), Manual de instalação (24 páginas), Manual de instalação (32 páginas), Manual de utilização e cuidados (24 páginas), Manual de instalação (28 páginas), Manual de serviço (41 páginas), Manual de utilização e cuidados (21 páginas), Manual de instalação (32 páginas), Manual de serviço (36 páginas), Manual de instalação (32 páginas), Manual de início rápido e de segurança (13 páginas)

Imprimir página
Bosch FAP-OC 500Series Manual de utilização e cuidados
Resetting the saturation displays
Press and hold the
button.
7
Switching over the display for circulating-air mode
For circulating-air mode, the electronic control display
must be switched over accordingly:
The extractor hood must be connected and switched
▯
off.

Cleaning and maintenance

WARNING
9
RISK OF BURNS
The appliance will become hot when in use,
especially in the area surrounding the bulbs. Let
cool before cleaning.
WARNING
9
WARNING
To avoid risk of fire and explosion do not use
flammable liquids or solvents. Always unplug or
disconnect the appliance from the power supply
before servicing.
Hidden surfaces may have sharp edges.
Use caution when reaching behind or
under appliance.
WARNING
9
RISK OF ELECTRIC SHOCK
Penetrating damp can cause electric shock. Only
clean appliance with a damp cloth. Prior to cleaning,
pull the plug or flip the breaker in the fusebox.
WARNING
9
RISK OF ELECTRICAL SHOCK
Moisture entering the appliance can cause an
electrical shock. Don't use a high-pressure cleaner
or steam cleaner.
WARNING
9
RISK OF INJURY
Components inside the appliance may have sharp
edges. Wear protective gloves.
Press the "+" and "-" keys simultaneously until
▯
ventilator settings 1 and 2 light up briefly on the
display panel.
Repeatedly press the button combination to switch the
▯
electronic control display back to exhaust air mode
(display ventilator setting 1 lights up briefly).
Cleaning agents
To ensure that the different surfaces are not damaged by
using the wrong cleaning agent, follow the information in
the table. Do not use:
Harsh or abrasive cleaning agents,
▯
Cleaning agents with a high alcohol content,
▯
Hard scouring pads or cleaning sponges,
▯
High-pressure cleaners or steam cleaners.
▯
Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the
cleaning agents.
Area
Cleaning agent
Stainless steel
Hot soapy water:
Clean with a dishcloth and then dry
with a soft cloth.
Clean stainless steel surfaces in
the grain direction only.
Special stainless steel cleaning
products are available for purchase
from customer service or from spe-
cialist retailers. Apply a very thin
layer of the cleaning product with a
soft cloth.
Painted surfaces
Hot soapy water:
Clean using a damp dishcloth and
dry with a soft cloth/towel.
Do not use any stainless steel
cleaners.
Aluminum and
Glass cleaner:
plastic
Clean with a soft cloth.
Glass
Glass cleaner:
Clean with a soft cloth. Do not use
a glass scraper.
Operating con-
Hot soapy water:
trols
Clean using a damp dishcloth and
dry with a soft cloth/towel.
Risk of electric shock from pene-
trating moisture.
Risk of damage to the electronics
from penetrating moisture. Never
clean operating controls with a wet
cloth.
Do not use any stainless steel
cleaners.
11