Bosch SB Series Manual de instruções - Página 31

Imprimir página

Switching the appliance on

Turn on tap fully.

Open the door.

Switch on ON/OFF switch (.

The Eco 45° programme has been

preset for environmentally friendly

operation whenever the appliance

starts. This programme remains

selected if no other programme

button 0 is pressed.

Press START button h.

Close the door.

Programme sequence starts.

Time preselection

You can delay the start of the

programme by up to 24 hours.

Depending on the setting of the time

display, the end of programme is

indicated with "Finish in" (for example

3h 25m) or "Finish at" (for example

15:20 hours).

Open the door.

Switch on ON/OFF switch (.

Selects programme 0.

Press time preselection button X.

Keep pressing the setting buttons + -

P until the displayed time

corresponds with your requirements.

Press START button h, timer

programming is activated.

To delete the time preselection,

press START button h for approx.

3 seconds.

Time preselection was terminated.

Close the door.

Operating the appliance aus

Programme end

* The programme has ended when

"Finished" is indicated on the display

window at the top @ and on the front

display * )2.

* The end of the programme is

displayed on the floor – provided the

TimeLight (optical display) is switched

on and is visible.

* depending on the features of your

dishwasher

Switching off the appliance

Short time after the end of the

programme:

Open the door.

Switch off ON/OFF switch (.

Turn off tap (does not apply to

appliances with Aqua-Stop).

Remove the utensils when they have

cooled down.

When the programme ends,

Note:

leave the appliance to cool down a

while before opening it. This will prevent

steam from escaping and causing

long-term damage to your built-in

furniture.