Bosch SB Series Manual de instruções - Página 22

Imprimir página

Operating the appliance

To change the setting:

1. By pressing the 3 button, you can

switch Eco drying on :

2. Press START button `.

The set value is saved.

3. Close the door.

Notes

Eco drying is activated only in

conjunction with the Eco 50°

programme.

Eco drying is deactivated when

– intensive drying is switched on.

– the Eco 50° programme has

been selected in conjunction with

one or more additional functions.

– the electronic childproof lock *

has been switched on.

* depending on model

Optical display while

the programme is running *

* depending on model

While the programme is running,

an optical display is indicated

on the floor under the appliance door.

If the base panel is pulled forwards

or if the appliance is installed at eye-

level with flush furniture front, the display

is not visible.

Possible settings of the optical

display:

The display is switched off.

Programme, timer programming,

remaining time, end of programme

and, if required, low water level are

displayed.

Same as :

information is also displayed,

e.g. the symbol for half load §

or glass protection system

active W.

is set at the factory.

or off

O p t i c a l d i s p l a y w h i l e t h e p r o g r a m m e i s r u n n i n g

. Other programme

To change the setting:

1. Open the door.

2. Switch on ON/OFF switch (.

3. Hold down programme button #

and press START button `

until : .... is indicated on the digital

display.

4. Release both buttons.

The illuminated display of the

button # flashes.

5. Keep pressing programme

button # until the previously set

value, e.g. :

digital display h : ... (for the

optical display).

6. Keep pressing programme

button 3 until the required value,

e.g. :

, is indicated on the digital

display h.

7. Press START button `.

The set value is saved.

8. Close the door.

Remaining running time

display

When the programme is selected, the

programme running time is indicated

on the digital display h. When the

programme has started, the remaining

running time is displayed on the floor

(only for settings :

The running time is determined during

the programme by the water

temperature, the number of utensils

as well as the degree of soiling

and may vary

(depending on the selected

programme).

, is indicated on the

and :