Bosch SB Series Manual de instruções - Página 25

Imprimir página

End of programme

value ‹:‹‹ is indicated on the numerical

The programme has ended when the

display h.

The end of the programme is also

indicated by an acoustic signal. This

function can be changed as follows:

1. Open the door.

2. Switch on ON/OFF switch (.

3. Hold down programme button #

and press START button ` until

•:‹.... is indicated on the digital

display.

4. Release both buttons.

The LED for button # flashes and

the digital display h displays the

factory setting •:‹....

5. Press programme button # until

the factory set value ›:‹ƒ is

indicated on the digital display h.

To change the setting,

1. Press programme button 3. Each

time the button is pressed, the set

the value of ›:‹„ has been reached,

value increases by one level; when

the display jumps back to ›:‹‹ (off).

2. Press START button `, the set

value is saved.

3. Close the door.

Note

When Eco drying is switched on, the

end of the programme is not indicated

by an acoustic signal.

Operating the appliance

Automatic switch off after end

of programme or interior light*

* depending on model

To save energy, the dishwasher can be

automatically switched off 1 min or 120

min after the programme ends.

The setting can be selected from ˜:‹‹

to ˜:‹ƒ.

˜:‹‹ Appliance does not

switch off automatically.

The interior light 1"

comes on when the door

is opened irrespective of whether

the ON/OFF switch (

is switched on or off. When

the door is closed the light is off. If

the door is open for longer than 60

min., the light switches off

automatically. The interior light 1"

is lit only when the set value ˜:‹‹

is selected.

˜:‹‚ Appliance switches off after 1 min.

˜:‹ƒ Appliance switches off after 120

min.

A u t o m a t i c s w i t c h o f f / i n t e r i o r l i g h t