Bosch SB Series Manual de instruções - Página 22

Imprimir página

Operating the appliance

Operating

the appliance

n g

O p e r a t i

Programme data

The programme data (consumption

values) can be found in the summary of

instructions. They refer to normal

conditions and the water hardness set

value :

. Different influencing factors

such as e.g. water temperature or line

pressure may result in deviations.

A qua sensor *

A q u a s e n s o r

* depending on model

The Aqua sensor is an optical

measuring device (light barrier) which

measures the turbidity of the rinsing

water.

The Aqua sensor is used according to

the programme. If the Aqua sensor is

active, "clean" rinsing water can be

transferred to the next rinse bath and

water consumption can be reduced by

3–6 litres. If the turbidity is greater, the

water is drained and is replaced with

fresh water. In the automatic

programmes the temperature and

running time can also be adjusted to the

degree of soiling.

Eco drying

If you have selected the Eco 50°

programme, the door opens

automatically when the programme

ends. This ensures a particularly

economical drying result. You can

switch Eco drying on or off.

1. Close the door.

2. Switch on ON/OFF switch (.

3. Hold down programme button #

and press START button h until

i a n c e

t h e a p p l

: ... is indicated on the digital

display.

4. Release both buttons.

The LED for button # flashes and

the digital display )* displays the

factory setting :

5. Press programme button # until

the factory set value :

indicated on the digital display )*.

To change the setting:

1. By pressing the 3 button, you can

switch Eco drying on :

2. Press START button h.

The set value is saved.

Notes

Eco drying is activated only in

conjunction with the Eco 50°

programme.

Eco drying is deactivated when

– intensive drying is switched on.

– the Eco 50° programme has

been selected in conjunction with

one or more additional functions.

– the button lock * has been

activated.

* depending on model

Switching on the appliance

1. Turn on the tap fully.

2. Switch on ON/OFF switch (.

The Eco 50° programme display

flashes. This programme remains

selected if no other programme

button 0 is pressed. The expected

programme duration

flashes on the digital display )*.

3. Press the START button h.

The programme starts running.

or off