Bosch SB Series Manual de Instruções - Página 26

Imprimir página

Operating the appliance

Interrupting the programme

1. Open the door.

2. Switch off ON/OFF switch (.

The LEDs go out. The programme is

saved.

If the door was opened on an

appliance which has a warm water

connection or is heated, first leave

the door ajar for several minutes and

then close. Otherwise, expansion

(pressure) may cause the appliance

door to spring open or water to run

out of the appliance.

3. To continue the programme, switch

on the ON/OFF switch ( again.

4. Close the door.

T erminating the programme

T e r m i n a t i n g t h e p r o g r a m m e

(Reset)

1. Open the door.

2. Press START button )"

for approx. 3 sec.

The digital display 8 shows: :

the display window )2 indicates:

Program was terminated, Ready in

1 minute.

3. Close the door.

The programme sequence lasts

approx. 1 min. The digital display

8 shows: :

window )2 indicates: Finished.

4. Open the door.

5. Switch off ON/OFF switch (.

6. Close the door.

, the display

Changing the programme

When the START button )" has been

pressed, the programme cannot be

changed.

The only way a programme can be

changed is by Cancel programme

(Reset).

Intensive drying

The final rinse uses a higher

temperature which improves the drying

result. The running time may increase

slightly. (Caution if utensils are delicate!)

1. Open the door.

2. Switch on ON/OFF switch (.

3. Hold down programme button #

and press START button )" until

: .... is indicated on the digital

display.

4. Release both buttons.

The LED for button # flashes and

the digital display 8 displays the

factory setting :

5. Press programme button # until

the factory set value :

indicated on the digital display 8.

To change the setting,

1. Press the button 3 to switch the

Intensive drying on :

2. Press START button )".

The set value is saved.

3. Close the door.

or off :