Bosch SB Series Manual de instruções - Página 33

Imprimir página

Fault

Water stains on plastic

parts.

Washable or water-soluble

coatings in the container or

on the door.

White, stubborn coatings;

limescale on the utensils,

container or door.

Tea or lipstick residue on

the utensils.

Cause

Droplet formation on plastic

surface is physically unavoidable.

After drying, water stains are

visible.

Detergent substances are

deposited. These coatings cannot

usually be removed with

chemicals (appliance cleaner, ...).

If there is a "white coating" on the

container floor, the water

softening system has been set

marginally.

Salt dispenser cover 1b not

closed.

Only for glasses: Initial glass

corrosion – can only apparently

be wiped off.

Detergent substances are

deposited. These coatings cannot

usually be removed with

chemicals (appliance cleaner, ...).

Hardness range incorrectly set or

water hardness greater than 8.9

mmol/l.

3 in 1 detergent or bio/eco

detergent not effective enough.

Underdosing of detergent.

Too weak rinse programme

selected.

Too low rinsing temperature.

Too little or unsuitable detergent. Use suitable detergent at correct dosage.

Utensils precleaned too intensely;

sensors therefore decide on

weak programme sequence.

Stubborn soiling cannot be

completely removed.

Fault, what to do?

Remedial action

Use a more intensive programme (more

water changes).

Arrange utensils in a sloping position.

Use rinse aid.

If required, increase softening setting.

Change detergent brand.

Clean appliance mechanically.

Increase softening setting and change

detergent if required.

Close salt dispenser cover correctly.

See "Glass and utensil damage".

Change detergent brand.

Clean appliance mechanically.

Set water softening system according to

instructions for use or top up salt.

Set water softening system according to

instructions for use or use separate

detergents (proprietary detergent, salt, rinse

aid).

Increase detergent dosage or change

detergent.

Select a more intensive rinse programme.

Select programme with higher washing

temperature.

Do not prerinse utensils. Remove only large

food remnants.

Recommended programme Eco 50°