Bosch SB Series Manual de instruções - Página 22

Imprimir página

Operating the appliance

T imer programming *

T i m e r p r o g r a m m i n g

* depending on model

You can delay the start of the

programme in 1-hour steps up to

24 hours.

1. Close the door.

2. Switch on ON/OFF switch (.

3. Press button @ + until the digital

display )" jumps to :

4. Press @ + or – button until the

displayed time corresponds with your

requirements.

5. Press START button P, timer

programming is activated.

6. To delete timer programming, press

the @ + or – button until )" :

is indicated on the digital display.

You can change your programme

selection at any time until the

programme starts.

End of programme

The programme has ended when the

value :

is indicated on the numerical

display )".

Switching off automatically

after the end of

the programme *

* depending on model

To save energy, the dishwasher is

switched off 1 minute after the

programme ends (factory setting).

Automatic disconnection

can be adjusted from :

Appliance does not switch off

automatically

Off after 1 min

Off after 120 min

S w i t c h i n g o f f a u t o m a t i c a l l y a f t e r t h e e n d o f t h e p r o g r a m m e

to :

1. Close the door.

2. Switch on ON/OFF switch (.

3. Hold down programme button #

and press START button P

until : ... is indicated on the digital

display.

4. Release both buttons.

The LED for button # flashes and

the digital display )" displays the

factory setting :

5. Press programme button # until

the factory set value :

is indicated on the digital

display )".

To change the setting:

1. Press programme button 3.

Each time the button is pressed, the

set value increases by one level;

when the value of :

reached, the display jumps back

to :

(off).

2. Press START button P.

The set value is saved.

Switching off the appliance

Short time after the end of the

programme:

1. Switch off ON/OFF switch (.

2. Turn off the tap (not applicable if

Aqua-Stop fitted).

3. Remove the utensils when they have

cooled down.

Note

When the programme ends, leave

the appliance to cool down a while

before opening it. This will prevent

steam from escaping and causing long-

term damage to your built-in furniture.

has been