Bosch sce53m05au Manual de Instruções - Página 6

Procurar online ou descarregar pdf Manual de Instruções para Máquina de lavar loiça Bosch sce53m05au. Bosch sce53m05au 23 páginas. Bosch dishwasher operating instructions

Imprimir página

Rinse aid %

As soon as the rinse-aid refill indicator X

is lit on the fascia, there is still a rinse-aid

reserve of 1 – 2 rinsing processes. Refill

with rinse aid.

The rinse aid is required for stain-free

utensils and clear glasses. Use only rinse

aid for domestic dishwashers.

Combined detergents with rinse-aid

component may be used up to a water

hardness of 21° dH (37° fH, 26° Clarke,

3.7 mmol/l) only. If the water hardness is

over 21° dH, rinse aid must be used.

– Open the dispenser 1B by pressing

and lifting the plate on the cover.

– Carefully pour rinse aid up to the max.

mark in the filler opening.

– Close cover until it clicks shut.

– To prevent excessive foam formation

during the next rinse cycle, remove any

rinse aid which has run over with a

cloth.

Setting amount of rinse aid

The amount of rinse aid dispensed can be

set from :

setting :

Do not change the amount of rinse aid

unless streaks (select lower setting) or

water stains (select higher setting) are left

on the utensils.

– Close the door.

– Switch on ON/OFF switch (.

– Hold down programme button # and

press START button H until : .... is

indicated on the digital display.

– Release both buttons.

– Press programme button # until the

factory set value :

the digital display `.

To change the setting:

– Press programme button 3.

Each time the button is pressed, the

set value increases by one level; when

the value of :

the display jumps back to :

– Press START button H.

The set value is saved.

Switching off rinse aid refill

indicator

If the rinse-aid refill indicator X is

impaired (e.g. when using combined

detergents containing rinse aid

component), it can be switched off.

– Proceed as described under "Setting

amount of rinse aid" and set the value

to :

The rinse aid refill indicator X is now

switched off.

PD[

to :

. This is the factory

is indicated on

has been reached,

(off).