Bosch SGE63E15UC/52 Manual de instruções de instalação - Página 7

Procurar online ou descarregar pdf Manual de instruções de instalação para Máquina de lavar loiça Bosch SGE63E15UC/52. Bosch SGE63E15UC/52 37 páginas.

Imprimir página
Electrical
Preparation
Avoid Electrical
Shock Hazard
Do not work on an energized
circuit.
Doing
so
could
result
in serious
injury
or death.
Only
qualified
electricians
should
perform
electrical
work. Do not attempt any work on the dishwasher
electric
supply
circuit
until you are certain
the
circuit
is de=energized.
Avoid Fire Hazard
Make sure electrical
work is properly installed.
Only qualified
electricians should perform
electrical work.
Electrical
Supply
The customer has the responsibility
of ensuring that the
dishwasher
electrical installation
is in compliance with all
national
and local electrical
codes and ordinances.
The
dishwasher
is designed for an electrical
supply of 120V,
60 Hz, AC, connected to a dishwasher-dedicated,
properly
grounded electrical circuit with a fuse or breaker rated for 15
amps. Electrical supply conductors shall be a minimum #14
AWG copper wire rated at 75°C (167°F) or higher.
Avoid Fire Hazard
Make sure there are no loose electrical connections.
Make sure all electrical
connections
are properly
made.
Grounding
Instructions
The dishwasher
must
be properly
grounded
before
operating.
This
appliance
must
be connected
to
a grounded
metal
permanent
wiring
system,
or an
equipment grounding conductor must be run with the circuit
conductors
and connected
to the equipment
grounding
terminal or lead on the dishwasher.
Make sure that the
dishwasher is connected to a suitable ground in compliance
with all local codes or, in the absence of a local code, with
the NATIONAL ELECTRICAL CODE in the United States or
the CANADIAN
ELECTRIC CODE C22.1-1atest edition in
Canada as well as any provincial/state or municipal or local
codes that apply.
Dishwasher
Electrical
Rating
Volts
Hertz
Amperes
Watts
120
60
12
1,300
(max)
Electrical
Connection
The dishwasher
electrical
supply junction
box (P) and
dedicated
receptacle
must be mounted in an accessible
cabinet adjacent to the dishwasher (do not mount the junction
box or receptacle behind the dishwasher). You will need a
43/4 " x 23/8 " (120 x 60mm) opening through the cabinet in
order to pass the junction box through (see Figure 6). If the
opening is made through wood, sand it smooth. If the opening
is made through metal, use the included protective grommet
(I) or other approved method to protect wiring from damage.
Use the four screws included (or appropriate fastener) in the
parts bag to securely mount the junction box so that it can
be easily accessed (see Figure 6). The electrical supply can
be connected in two ways:
=
_
Figure 6
(_ Dishwasher
"_/
/
I Electrical
Supply[
/
L Juno
f
,_w!th d!shwas hery
Figure 7
Method A - Three prong plug and receptacle
Use the included
three-prong
plug and junction
box to
connect to a dedicated household
receptacle. Make sure
the household
receptacle
meets the electrical
supply
requirements as well as national and local codes.
7