Dragon Touch Classic 15 Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Moldura fotográfica digital Dragon Touch Classic 15. Dragon Touch Classic 15 13 páginas.

③ Install the anchors. Use a hammer to tap the four anchors into the four holes

drilled in the previous step.

④ Secure the wall mount. Attach the wall mount to the wall in a "V" shape (with the

big opening facing up), and drive the four long screws into the anchors to ﬁx the

wall mount on the wall.

3. Installing the Frame Back Bracket

① Lay the photo frame face-down on a ﬂat surface. The power button should be in

the upper left corner.

② Attach the back bracket to the back of the photo frame. Place the spring washers

under the screw heads, and use a screwdriver to tighten the 4 short screws on the

back of the photo frame.

4. Attaching the Photo Frame to the Wall

① Plug the power cord into the DC IN port on the photo frame.

② Hold the photo frame with the display screen facing towards you.

③ Put the frame back bracket a little bit higher than the wall mount, align the frame

back bracket with the wall mount, slide down slowly to hang the frame on the wall.

④ Installation is complete.