DRAKE ND-24-IP Manual rápido - Página 2

Procurar online ou descarregar pdf Manual rápido para Conversor de multimédia DRAKE ND-24-IP. DRAKE ND-24-IP 4 páginas.

STEP 1: Login

Pressing the ENTER key will enter the selected menu item. Selecting DHCP: disabled will provide additional

settings for IP Address, Subnet Mask and Gateway Address. For editable items the LEFT ARROW and RIGHT

ARROW keys will move the cursor left and right, the UP ARROW and DOWN ARROW keys will modify the value

at the cursor, and the ENTER key will accept the new value and return to the previous menu.

After pressing ENTER changes will not be applied until backing out of the edit menu by pressing the LEFT

ARROW button. At which point you will be prompted to confirm changes. Selecting "YES" at the prompt will

store new settings for that interface.

STEP 2: Configure Inputs

IP Stream Input

Source Type: UDP Multicast or UDP Unicast

Multicast Group: Specify Multicast Group

Port: Specify port

IGMP Version: IGMPv2 or IGMPv3. Only used for Multicast streams.

Program Selection: Auto, Program Number, or Manual Select. Auto selects the first program in the

PAT table. See below for Program Number. Manual Select will show a "Select Scan" button which will

display all available programs. (Example of Manual Select is shown under

Program Number: Only used when Program Selection is set to Program Number

Apply new settings or Revert Changes to previous settings.

(continued)

on the next page.)