Advanced Elements BackBone AE2023-AFC Manuais de utilização - Página 2
Procurar online ou descarregar pdf Manuais de utilização para Equipamento de navegação Advanced Elements BackBone AE2023-AFC. Advanced Elements BackBone AE2023-AFC 2 páginas.
Imprimir página
INSTRUCTIONS FOR INSTALLING THE BACKBONE (Models AE2023)
AE2023-AF1
AdvancedFrame Expedition Shown in Illustration.
TM
The BackBone installs similarly in each model.
TM
STEP 1.
Con rm that you have the correct model BackBone™ for your kayak by reviewing the four models listed above.
STEP 2.
Assemble the End Plates to the BackBone™ Shaft by pushing the button snap and joining.
End Plate
STEP 3.
(AE2023-AF1 go to step 4.) For models AE2021-AFX, AFC, and DF2, Next attach the center Shaft part to either end, but do not connect the two
remaining halves.
STEP 4.
With your kayak de ated, remove the in atable oor. For the Lagoon2/DF2 XC, Install foam oor before proceeding to STEP 5.
STEP 5.
Center the End Plates (with logo facing up) at each end of the seating compartment, resting on the bottom skin of the kayak. The curved surfaces of
the End Plates should rest against the gray fabric tube cover.
STEP 6.
Connect the two ends of the BackBone™ together to complete the assembly. Be sure the button snap clicks into place, locking the sections together.
STEP 7.
Before in ating your kayak, check to be sure that the BackBone™ is centered on the bottom skin of the kayak. It may be helpful to mark the center line
of the kayak with a permanent marker.
STEP 8.
Slowly in ate the kayak, periodically checking to be sure the BackBone™ remains centered. As the main chamber lls with air, it will compress against
the End Plates to hold it in place.
STEP 9.
(AdvancedFrame models only) Place the in atable oor in the kayak, over the BackBone™, and in ate while in-place.
For visual tutorials on how to install the BackBone™ visit our youtube site @ www.youtube.com/advancedelements
For use with AE1012, AE1017 & AE1002: AdvancedFrame™, AdvancedFrame™ Sport & AirFrame1
AE2023-AF1 BackBone™ 79.5" long - 4 parts total
AE2023-AFX, AE2023-AFC and AE2023-DF2
AE2023-AFX For use with AE1009 AdvancedFrame™ Expedition = 114.5"
AE2023-AFC For use with AE1007 & 1004 AdvancedFrame™ Convertible & AdvancedFrame™ 2 = 126.5"
AE2023-DF2 For use with AE1033 & AE1023 Lagoon™ 2 & DragonFly2™ XC = 109.5"
Shaft
Do not connect yet
79.5"
Length
5 parts total
Center Shaft
Inner Tube of Kayak
BackBone placement within kayak.
TM
Note that the BackBone does not
TM
extend the entire length of the kayak.