AirStage AS 9UF Manual de instruções - Página 2

Procurar online ou descarregar pdf Manual de instruções para Ar condicionado AirStage AS 9UF. AirStage AS 9UF 2 páginas. Compact wall mounted type air conditioner

Imprimir página

PREPARATION

LOAD BATTERIES (R03/LR03 x 2)

1. Press and slide

the lid.

2. Insert batteries.

Be sure to follow the

polarity markings indi-

cated in the compart-

ment.

3. Slide back the lid.

SET THE CURRENT TIME

1. Press the TIME

ADJUST button.

2. Press the

button.

3. Press the TIME

1, 3

ADJUST button.

REMOTE CONTROLLER HOLDER

To set the remote con-

troller in the holder

1. Insert.

2. Press in.

To take out the remote

controller from the

holder

1. Slide up.

2. Pull out.

MANUAL AUTO OPERATION

Use the MANUAL AUTO operation when the remote

controller is lost or unavailable.

MANUAL

AUTO

Press

Press the MANUAL AUTO button on the main

unit control panel.

To stop operation, press the MANUAL AUTO button again.

NOTES

• Each press of the MANUAL AUTO button alternates

operation and stop.

• When the air conditioner is operated from the main

unit, "HEAT & COOL MODEL" will operate COOL or

HEAT. "COOLING ONLY MODEL" will operate AUTO.

• The fan speed is selected to "AUTO" and the tempera-

ture setting will be set to 23 °C.

SLEEP TIMER

To set or change the SLEEP Timer

1. Press the

(SLEEP) button.

2. Press the

button.

Adjust the OFF TIME.

To cancel the SLEEP Timer

Press the

button.

Select

(TIMER RESET).

The air conditioner will return to normal operation.

MASTER CONTROL

Press the

button while in operation.

NOTES

AUTO

COOL

DRY

FAN

HEAT

"HEAT & COOL MODEL" cannot operate AUTO and FAN.

"COOLING ONLY MODEL" cannot operate HEAT.

TEMPERATURE

Press the

button while in operation.

Temperature setting range

NOTES

AUTO • • • • • • • 18 to 30 °C

HEAT • • • • • • • 16 to 30 °C

COOL/DRY • • • 18 to 30 °C

The thermostat setting should be considered a stan-

dard value, and may differ somewhat from the ac-

tual room temperature.

AIR DIRECTION (UPPER AND LOWER)

Press the

button while in operation.

For swing operation:

Press the

button while in operation.

Stop the setting by pressing it again.

NOTES

(1) Airflow direction

Cooling mode • • • • 1 to 3

Heating mode • • • • 1 to 6

(2) Range of swing

The range of swing is relative to the currently set airflow

direction.

1, 2, 3 • • • • • 1 to 3

4, 5, 6 • • • • • 4 to 6

NOTES

(1) The remote controller must be pointed at signal receiver to operate correctly.

(2) Operating range : About 7 meters.

(3) Beeping sound

• When a signal is properly received by the air conditioner, a beeping sound will be

heard twice.

• If an invalid signal is received by the air conditioner, a beeping sound will be heard 5

times.

• If no beeping sound is heard, press the remote controller button again.

(4) The buttons except the SLEEP, TIME ADJUST and ACL buttons can only be selected

while in operation mode.

OPERATION

ON / OFF TIMER

1. Press the

button.

Select

(OFF TIMER) or

NOTES

RESET

PROGRAM TIMER (OFF

2. Press the

Adjust the OFF or ON TIME.

PROGRAM TIMER

To set or change the PROGRAM Timer

1. Press the

button.

Select

(OFF TIMER).

2. Press the

Adjust the OFF time.

3. Repeat Step 1 and 2 to adjust ON time.

4. Press the

button.

Select

(PROGRAM TIMER).

(If the ON timer has been selected to operate

first, the unit will stop operating at this point.)

To cancel the PROGRAM Timer

Press the

button.

Select

(TIMER RESET).

The air conditioner will return to normal operation.

FAN SPEED

Press the

button while in operation.

NOTES

(Select the fan speed

automatically.)

START / STOP

Each press of the

operation and stop.

(5) PROGRAM timer

• The PROGRAM timer allows you to integrate OFF timer and ON timer operations

in a single sequence.

• The first timer function to operate will be the one set nearest to the current time.

(6) SLEEP timer

To prevent excessive warming or cooling during sleep, the SLEEP timer function au-

tomatically modifies the set temperature in accordance with the time setting. When

the set time has elapsed, the air conditioner completely stops.

(7) When connecting with other remote controllers, the indoor unit might be controlled by

the other remote controllers.

CLEANING AND CARE

CLEANING THE INTAKE GRILLE AND THE

AIR FILTER

(ON TIMER).

1. Remove the intake grille and the air filter.

1 Place your fingers at both

lower ends of the grille

OFF TIMER

ON TIMER

panel, and lift forward.

ON, OFF

ON)

2 Pull down the knob.

button.

3 Open the intake grille , and

lift the intake grille upward,

until the axle at the top of

the intake grille is removed.

4 Lift up the air

filter 's handle,

disconnect the

two lower tabs,

and pull out the

air filter.

button.

2. Cleaning

Intake grille : Remove dust with a vacuum cleaner, wash

the grille with warm water, and then dry with a clean and

soft cloth.

Air filter : Remove dust with a vacuum cleaner or by wash-

ing. After washing, be sure to allow it to dry thoroughly in

a shady place before reinstalling.

3. Replace the intake grille and the air filter.

1 Align the sides of

the air filter with

the panel, and

push in fully, mak-

ing sure the two

lower tabs are returned

properly to their holes in

the panel.

2 The fixing axle of the in-

AUTO

HIGH

MED

LOW

take grille is installed on

the front panel.

3 Lay down the intake grille.

CAUTION

button alternates

Don't turn on the indoor unit when the intake grille has been

removed.

NOTES

• When used for extended periods, the unit may accumulate dirt

inside, reducing its performance. We recommend that the unit

be inspected regularly, in addition to your own cleaning and

care.

For more information, consult authorized service personnel.

• Dust can be cleaned from the air filter either with a vacuum

cleaner, or by washing the filter in a solution of mild detergent

and warm water.

• When cleaning the unit, do not use water hotter than 40 °C,

harsh abrasive cleansers, or volatile agents like benzene or

thinner.

• Do not expose the unit to liquid insecticides or hairsprays.

• During periods of normal use, the air filters should be cleaned

every two weeks.

• When shutting down the unit for one month or more, first allow

the fan mode to operate continuously for about one-half day to

allow internal parts to dry thoroughly.

Intake grille

Fixing

axle

Knob

Air filter handle

Hooks (two places)

Fixing axle

Mounting

shaft

Knob

Intake

grille

Fixing

axle

Knob