Bosch SRZ2045UC - Panel For 18" Dishwasher Manual de Planeamento - Página 5

Procurar online ou descarregar pdf Manual de Planeamento para Máquina de lavar loiça Bosch SRZ2045UC - Panel For 18" Dishwasher. Bosch SRZ2045UC - Panel For 18" Dishwasher 12 páginas. Custom dishwasher

Imprimir página

6 |

Bosch Custom Dishwasher Planning Guide

Planning for your Custom Panel Dishwasher

Before installing a Bosch dishwasher, be sure to verify the cabinet dimensions, electrical

connections and water connections. Always consult the installation manual included with

the product for complete details before installing.

What to consider when installing a custom panel dishwasher

Bosch dishwashers are designed to be surrounded by standard residential kitchen cabinetry. If the dishwasher is to be

installed in a corner, make sure that there is adequate clearance of 27" to open the door.

For SHV43P13UC, SHV65P03UC, and SHV68P03UC

– Minimum opening height: 34" (860 mm)

– Minimum opening width: 24" (610 mm) or 23

⁄

" (600 mm) Wide with decor strips removed

For SHV58E13UC and SHV68E13UC

– Minimum opening height: 34

⁄

" (865 mm)

– Minimum opening width: 24" (610 mm) or 23

⁄

" (600 mm) Wide with decor strips removed

Bosch

Custom Panel

Dishwasher

toekick

Installation options

Custom panel models allow you to have a door panel made to match your

cabinetry. The door panel can be a two-piece design (model

a drawer at the top and a cabinet door at the bottom or a single full-length

door (model

). A template is included with the custom panel models to

explain the mounting procedure. Additional templates can be ordered by

calling customer service at 1-800-944-2904.

NOTE: The door springs that are included with the custom panel units will

provide proper function for custom door panels weighing between 9 and

18 pounds. SHV43P13UC, SHV65P03UC, and SHV68P03UC allow you to

adjust the screw tension to accommodate for the weight of the door panel.

SHV58E13UC and SHV68E13UC require no tension adjustment screws as

the hinges self adjust to weights ranging from 9 to 18 pounds.

–

Custom panel height

Height from

Height

bottom edge

of the

of countertop

toe-kick

to floor

Suggested dimensions for 34

⁄

" countertop height and 4

– Suggested panel thickness:

⁄

– Suggested panel width:

⁄

– Suggested panel height:

30"

– Suggested panel weight:

9–18 lbs

Note: As all installations are different, please verify dimensions

for your specific project.

) to look like

Water and electrical locations

For proper dishwasher operation and appearance, ensure the enclosure is

square and the openings allow for passage of water, drain and electrical line.

Select a location as close to the sink as possible for easy access to water

supply and drain lines. In order to avoid interference with the dishwasher when

sliding it into the cabinet, place your openings within the dimensions shown.

Plumbing and electrical supply hoses must attach to the dishwasher within the

shaded area.

Note: Plumbing installations will vary – refer to local codes. The maximum

length of the drain hose, including hose leading to air gap (if any) is 150"

(3810 mm). Ensure a portion of the drain hose is raised at least 20" (508 mm)

above the floor to ensure proper draining.

Special consideration for SHV58E13UC and SHV68E13UC

⁄

" x 2" (108 x 52 mm) – To pass the included electrical supply junction box through to an adjacent cabinet

4" x 2" (100 x 50 mm) – To pass the included water supply line to the water supply

⁄

" (32 mm) diameter – To pass the dishwasher drain hose to the drain connection

NOTE: If the incoming electric supply, water supply and drain connections are all in the same cabinet, the one 4

(108 x 52 mm) hole will generally be large enough for all three parts to pass through.

The dishwasher electrical supply junction box and dedicated receptacle must be mounted in an accessible cabinet adjacent to the

dishwasher (do not mount the junction box or receptacle behind the dishwasher).

⁄

" toekick:

The electrical supply can be connected in one of two ways:

1. Use the included three prong plug and junction box to connect to a dedicated household receptacle.

2. Permanently connect to household or field wiring

90°

Water

Shut Off

Dishwasher

Valve

Water Inlet

Hose

Bosch Custom Dishwasher Planning Guide

Describes

the space

the cutout

(if any)

of adjoining

between

cabinets

and wall

Dedicated

Receptacle or

Field Wiring

Dishwasher

Electrical Supply

Junction Box

Electric cord with

junction box and

three prong plug

are included

with dishwasher

| 7

90°

⁄

" x 2"